***Start of Notice Update 20261020 The purpose of this update is to provide Government responses to follow-up industry questions provided via e-mail 14 October 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 3. ***End of Notice Update 20261020*** ***Start of Notice Update 20260917*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 2. This notice also updates to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 29 July 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about first quarter FY 2027 , with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260917*** ***Start of Notice Update 20260821*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 1. ***End of Notice Update 20260821*** ***Start of Notice Update 20260730*** The purpose of this update is to provide Government responses to industry questions discussed during the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting. ***End of Notice Update 20260730*** ***Start of Notice Update 20260729*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about late fourth quarter FY 2026 , with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260729*** ***Start of Notice Description 20260709*** NOTE - The Solicitation number for the E-6B Maintenance, Repair and Overhaul (MRO) effort has been updated to N0001926R1039. The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts a DRAFT Request for Proposal (RFP) for the PMA-271 E-6B Mercury Depot MRO effort. This notice is a follow-on to the E-6B MRO Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. NAVAIR intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of work under this IDIQ contract will include performing scheduled and unscheduled depot maintenance tasks and repairs in accordance with the Planned Maintenance Interval Specification, aircraft modifications via technical directives and engineering change proposals, and material fabrication. This effort will also include aircraft inductions for standalone drop-in modifications and repairs and a Contractor Field Team to support modifications and repairs offsite. Anticipated award is third quarter of Government Fiscal Year (FY) 2027. The 24 July 2026 response date identified in this posting is the response date for receiving Industry comments and questions associated with the DRAFT RFP. The DRAFT RFP, including all attachments, will be posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The intent of this posting is to solicit feedback from Industry on the DRAFT RFP and associated attachments prior to issuing the final RFP. Please submit questions using the file named “Draft RFP Question and Answer form_Offeror Name.xlsx” and replace Offeror Name with your Company name. This file is posted in the Solicitation Module of the U.S. Government PIEE and will be accessible with the DRAFT RFP and associated attachments after Offerors are granted access following the procedures set forth under “Access to documents”. Please submit questions not later than 24 July 2026. Any proprietary information provided in the questions or comments shall be marked or annotated accordingly. Classified material SHALL NOT be submitted. Access to documents – The DRAFT RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to the DRAFT RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, company name, address, and Commercial and Government Entity (CAGE) Code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module), as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#joint­certification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the DRAFT RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the DRAFT RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the DRAFT RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Distribution of CUI by a potential Offeror to that potential Offeror’s team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a “need to know” basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls, and distribution statements associated with the document. *************************************************************************************************** Additionally, NAVAIR is providing an opportunity for vendors to attend a Virtual Pre-Solicitation Conference and virtual One-on-One meetings to discuss the DRAFT RFP and associated attachments on 29 July 2026 and 30 July 2026, beginning at 08:00:00 AM (Eastern Time) and ending at 15:00:00 PM (Eastern Time) via Microsoft Teams. The Virtual Pre-Solicitation Conference and One-on-One Meetings will be held at the unclassified level. To attend either or both meetings, register via email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (David.t.guy.civ@us.navy.mil) by 24 July 2026 at 05:00:00 PM (Eastern Time). Pre-Solicitation Conference is open to all interested parties (potential Offerors and Subcontractors) One-on-One Meetings are open only to potential Prime Offerors Registration for either meeting must be completed in advance and is required for participation. Registration must include a list of attendees (name, title, phone number, and email). Exceptions will not be made for late registration. Changes to the registration information (cancellation or substitution) can be made up until 12:00:00 PM (Eastern Time) on 27 July 2026. Registration requests received after the deadline will not be accepted. Registered companies will be notified via email on or about 27 July 2026 with the time and information on how to join each session. Participation in the virtual meetings is neither mandatory nor is it a prerequisite to future participation by a potential Offeror in any potential future solicitations/contracts. DISCLAIMER PURSUANT TO FEDERAL ACQUISITION REGULATION (FAR) 15.101(b), THIS NOTICE IS BEING ISSUED FOR A DRAFT RFP. THE DRAFT RFP IS SOLELY FOR INFORMATION AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE AN RFP OR A PROMISE TO ISSUE AN RFP IN THE FUTURE. THE DRAFT RFP DOES NOT COMMIT THE GOVERNMENT TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. THE FINAL REQUIREMENT WILL BE DEFINED UNDER A FORMAL RFP. FURTHER, THE NAVY IS NOT AT THIS TIME SEEKING PROPOSALS AND WILL NOT ACCEPT UNSOLICITED PROPOSALS. RESPONDENTS ARE ADVISED THAT THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS PRESOLICITATION NOTICE. ALL COSTS ASSOCIATED WITH RESPONDING TO THIS ANNOUNCEMENT WILL BE SOLELY AT THE EXPENSE OF THE INTERESTED PARTY. IT IS THE RESPONSIBILITY OF THE POTENTIAL OFFERORS TO MONITOR THIS WEBSITE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. ***End of Notice Description 20260709*** ***Start Presolicitation Update 20260409*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 14 January 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of May 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about mid fourth quarter 2026, with a tentative closing date 30 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End Presolicitation Update 20260409*** This notice is an update to the E-6B Enhanced Phased Maintenance-Heavy (EPMH) Overhaul and Repair Sources Sought Notice N00019-25-RFPREQ-APM271-0012 posted on 30 May 2024, and the Special Notice of questions for interested party response posted on 11 August 2025. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around 24 April 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about 24 June 2026, with a tentative closing date of 08 August 2026. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice.
