Repair LRS Hazmat Roof, B155

Description

The Contractor must provide all plant, labor, equipment, transportation, and tools required to perform the entire design and replacement of the roof of building 155, replace the overhang covering the exhaust louver on the rear of the facility, and the overhang covering the entrance and roll up door on the front of the facility. The new roof and overhands shall eliminate each and every weather borne water leak into B155. The new roof shall be free from ponding. The new roof shall be insulated meeting ASHRAE zoning requirements for the facility. The new roof shall be a TPO single ply membrane roofing system. The work shall include but is not limited to: replacement of built up roof components down to roof decking, insulation, gutter system including downspouts, roof curbing, and roof coping. Perform all work according to this Statement of Work (SOW) and all related AF requirements and other codes and references.

Classifications

NAICS

238160

Roofing Contractors

23├Construction

238├Specialty Trade Contractors

2381├Foundation, Structure, and Building Exterior Contractors

23816├Roofing Contractors

238160└Roofing Contractors

PSC

Z2AA

REPAIR OR ALTERATION OF OFFICE BUILDINGS

Z├MAINT, REPAIR, ALTER REAL PROPERTY

Z2├MAINT, ALTER, REPAIR NONBUILDINGS

Z2AA└REPAIR OR ALTERATION OF OFFICE BUILDINGS

Set-Aside

SBA

Total Small Business Set-Aside (FAR 19.5)

Documents

Primary Contact

Secondary Contact