Debris Boom Supply and Install at Harry S. Truman Lake Project

Description

The purpose of the debris boom is to prevent floating debris from impacting the dam's tainter gates, which is crucial for maintaining the full operational capacity of the spillway. The boom will also serve as a visual barrier to boaters. The Contractor shall provide all labor, materials, equipment, engineering, fabrication, delivery, and optional installation necessary to furnish a complete debris boom system at Harry S. Truman Dam. The approximately 2,000-foot boom shall be designed to intercept floating debris upstream of the spillway and withstand site-specific hydraulic, wind, wave, debris, and impact loading conditions. The debris boom shall be designed for an 800-foot-long by 3-foot-thick debris field, use a minimum safety factor of 2.0 for design loads, withstand a direct head-on impact from an 18-inch-diameter, 100-foot-long log traveling at the maximum design water velocity, and withstand design conditions including 50 mph wind speed and 5-foot wave height. This acquisition is not set-aside for small business concerns and is competed as full and open competition, Unrestricted. An organized site visit has been scheduled for: Friday, 9 October 2026 at 11am.

Classification

NAICS

332312

Fabricated Structural Metal Manufacturing

31-33├Manufacturing

332├Fabricated Metal Product Manufacturing

3323├Architectural and Structural Metals Manufacturing

33231├Plate Work and Fabricated Structural Product Manufacturing

332312└Fabricated Structural Metal Manufacturing

PSC

2090

MISCELLANEOUS SHIP AND MARINE EQUIPMENT

20├SHIP AND MARINE EQUIPMENT

2090└Miscellaneous Ship and Marine Equipment

Set-aside

No Set aside used

Description

Points of contact

Contracting office

Classification

Documents