10-W continuous-wave pump lasers at 532nm– Combined Sources Sought/Notice of Intent to Sole Source

***THIS IS A COMBINED SOURCES SOUGHT NOTICE AND NOTICE OF INTENT TO SOLE SOURCE***

The National Institute of Standards and Technology (NIST) is seeking information from sources that may be capable of providing three (3) 10-W continuous-wave pump lasers at 532nm. If no alternate sources are identified, the Government intends to issue a Sole Source Award to Newport Corp., 1791 Deere AVE Irvine, CA 92606 (UEI: JH1RHJ5R7TT1) under the authority of FAR 12.102(a). The North American Industry Classification System (NAICS) code for this acquisition is 334516.

NIST has a need for three (3) 10 Watt continuous-wave pump lasers at 532 nm that meets or exceeds the following draft minimum specifications:

1. Technical Specifications
   1. Compatible with existing Coherent Mira Ti:Sapphire laser
   2. Output Characteristics
      1. Output Power  10 W
      2. Wavelength     532 nm
      3. Spatial Mode   TEM00
      4. Beam Quality (M2) <1.1
      5. Beam Diameter (1/e2) 2.3 mm ±10%
      6. Beam Divergence <0.5 mrad
      7. Polarization >100:1 vertical
      8. Power Stability ±1% (Measured over 2-hour period, after a 30-minute warm-up)
      9. Beam Pointing Stability  2 µrad/ °C (Measured at farfield, after a 30 minute warm-up)
      10. Noise   <0.04% rms (Measured over a 10 Hz to 0.1 GHz bandwidth at the 10 W output power)
   3. Two Platforms to match the pumps’ lasers’ beam height to the input beam heights of the two Spectra-Physics Tsunami lasers and one Coherent Mira laser should be included in the purchase.
   4. Pump lasers must include a guarantee that they will allow our existing Spectra-Physics Tsunami laser to meet its original specifications.
   5. Power Requirements
      1. Operating Voltage 110 VAC, 60 Hz
      2. Power Consumption <350 W (max)
   6. Environmental Specifications
      1. Operating Temperature 64-95°F (18-35°C)
      2. Relative Humidity 8-85%, non-condensing
      3. Cooling Requirements: Closed-loop chiller included for each pump laser

NIST conducted market research from September 2025 to April 2026 by attending conferences, speaking with colleagues, performing internet searches, and speaking with vendors to determine what sources could meet NIST’s minimum requirements.  The results of that market research revealed that only Newport Corp (UEI: JH1RHJ5R7TT1) appears to be capable of meeting NIST’s requirements.

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response.  Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed at the bottom of this notice as soon as possible, and preferably before the closing date and time of this notice.

• Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).
• Details about what your company is capable of providing that meets or exceeds NIST’s minimum requirements.
• Whether your company is an authorized reseller of the product or service being cited and evidence of such authorization.
• Identify any aspects of the description of the requirements in the BACKGROUND section above that could be viewed as unduly restrictive or create unnecessary barriers that adversely affect your firm’s ability to fully participate in a procurement for such services and explain why.  Please offer suggestions for how the requirements could be organized or structured to encourage the participation of small businesses.
• For the NAICS code

• Indicate whether your company is (a) a small business or (b) other than small business.  See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.
• If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. 

• If your firm has existing Federal Supply Schedule contract(s) or other contracts for products or services against which the Department may be able to place orders, identify the contract number(s) and other relevant information.

• Describe your firm’s experience (as a prime, subcontractor, or consultant) providing the products or services described in Background section.
• Provide any other information that you believe would be valuable for the Government to know as part of its market research for this requirement.
• Please let us know if you would like to engage to get a better understanding of the requirement or need additional information about the Government’s requirement for the products or services described in the Background section. 

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received with 5 days of this posting.  Questions will be anonymized and answered via sources sought notice amendment following the question submission deadline.

IMPORTANT NOTES

The information received in response to this notice will be reviewed and considered so that the NIST may appropriately solicit for its requirements in the near future. 

This notice should not be construed as a commitment by the NIST to issue a solicitation or ultimately award a contract. 

This notice is not a request for a quotation. Responses will not be considered as proposals or quotations.

No award will be made as a result of this notice. 

NIST is not responsible for any costs incurred by the respondents to this notice.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and appropriate.

Thank you for taking the time to submit a response to this request!