306 RQS - COMTAC Headsets and Accessories - Amendment 1

Amendment 1:

Quantity for each CLIN were found to be incorrect on the original solicitation. Correct quantities are as follows:

CLIN 0001 - (CT6.XCY.GC) ComTac VI Headset (Coyote) w/ 21 GC Downlead (53 EA)

CLIN 0002 - (ARS.D.GCR-GCR.GC-01) ARIES Dual Comm Push to Talk Assembly (53 EA)

CLIN 0003 -  (21GC.R.H13.8) 21 GC Series: PRC-163/RF-9820S/148E Spear Radio Connector with EUD - 8" Lead (53 EA)

CLIN 0004 - (21GC.I.009.8) 21 GC Series: Night Stalker ICS Cable (HI/Low Impedance) (53 EA)

All other terms and conditions remain the same unless expressed otherwise.

(End of Amendment 1)

-------------------------------------------------------------------------------------------------------------

SOLICITATION:

RFQ #FA4877-26-Q-A181

306th RQS ComTac Headset and Accessories

1. This is a solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and additional written solicitation will not be issued.
2. Solicitation FA4877-26-Q-A181 is issued as a Request for Quotation (RFQ).
3. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2026-01 effective 13 March 2026, R-DFARS provisions and clauses in effect 7 May 2026, and DAFFARS provisions and clauses in effect 16 October 2024. Additionally, Revolutionary FAR Overhaul updates and DFARS deviations applicable to this solicitation are dated on or after 1 February 2026.
4. This procurement is being issued as a set aside for total small business. The North American Industry Classification System Code is 334310 with a size standard of 750 employees.
5. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so.
6. Davis-Monthan Air Force Base intends to award a firm-fixed price contract for the following:

CLIN 0001 - (CT6.XCY.GC) ComTac VI Headset (Coyote) w/ 21 GC Downlead (35 EA)

CLIN 0002 - (ARS.D.GCR-GCR.GC-01) ARIES Dual Comm Push to Talk Assembly (35 EA)

CLIN 0003 -  (21GC.R.H13.8) 21 GC Series: PRC-163/RF-9820S/148E Spear Radio Connector with EUD - 8" Lead (35 EA)

CLIN 0004 - (21GC.I.009.8) 21 GC Series: Night Stalker ICS Cable (HI/Low Impedance) (35 EA)

1. All questions must be submitted no later than 15 July 2026, 12:00pm PDT
2. All quotes must be submitted via email no later than 20 July 2026, 12:00pm PDT and remain valid through 30 September 2026.
3. Quotes must include the following information:
   1.  Company Name, Company Address, CAGE Code, Small Business Type. Quotes must not exceed 4 pages (including cover page).
4. It is the responsibility of the quoter to review the posting for any changes or amendments that may occur concerning this RFQ. It is the responsibility of the quoter to ensure all quotes and/or questions are submitted in a timely manner by the specified due date.
5. Points of Contact:
   1. Primary: SSgt Devin Flores, devin.flores.2@us.af.mil, 520) 228-4967
   2. Alternate: Micky Hallman, micky.hallman.1@us.af.mil, (520) 228-2214
6.  Attachments 1. Redacted SS-BNO JA - COMTAC Headset
7.  52.212-2 Evaluation-Commercial Products and Commercial Services (Nov 2021)

   (a) The Government will award a contract resulting from this solicitation to the responsive and responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

   i. Price. The lowest priced offer will be evaluated for technical acceptability and best value to the Government. If found technically acceptable, award will be made without further consideration. If found technically unacceptable, the government will evaluate the next lowest quote for technical acceptability, and so on, until award can be made to the lowest priced technically acceptable quote. Therefore, the quoter’s initial quote should contain the quoter’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. Quotes that fail to furnish required representations or information or reject the terms and conditions of the solicitation may be excluded from consideration.

   ii. Technical. Technical capability of the service to meet the Government’s requirements in accordance with the Performance Work Statement. Contractor shall attach adequate supporting documentation so that the government is able to evaluate the capabilities of the vendor.

   (b) Options. Options are not included in this requirement.

   (c) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote’s specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

   (End of provision)

1. 5352.201-9101 ACC Ombudsman (Jul 2023)

An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official.

Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

1. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).
2. If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Deputy Director of Contracting, AFICC/KC (OL-ACC), 114 Thompson Street, Bldg. 586, Room 129, Langley AFB, VA 23665, telephone (757) 764-5372 (DSN 574-5372) email: acc.a7k1@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

The ombudsman has no authority to render a decision that binds the agency. Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer. (End of clause)

1. 5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS) As prescribed in DAFFARS 5323.804-90, insert the following clause in solicitations and contracts: ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) (JUN 2024)
   1. Contractors shall not:
   2.  Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process
   3. Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order.
      1.  For the purposes of Department of the Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs:
         •  Halons: 1011, 1202, 1211, 1301, and 2402;
         • Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and;
         • Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.

 [NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Department of the Air Force definition of a Class I ODS.]

 End of clause