BOAT CAPTURE NET

** This procurement is being conducted on a brand name basis. Only products manufactured by LIFT-IT MANUFACTURING CO., INC. (CAGE: 0NM47) will be accepted.  Vendors must provide a letter from the Original Equipment Manufacturer (OEM) stating that they are an authorized distributor/re-seller.  Failure to provide this documentation will result in the vendor’s offer being deemed non-responsive.**

1)

NSN: 2090 01-660-2125

Nomenclature: BOAT CAPTURE NET

U/I: EA

QTY: 06

PART #: 750-WMSL-583-514

DESCRIPTIVE/
SPEC DATA:

1) WEB PER - 904PME & 901PME, POLYESTER
2) ROPE PER 2 IN. NYLON DOUBLE BRAID
2 1-1/4" X 139" CAPTURE LINE 0.00 0.00
PER DWG. 750-WMSL-583-514 REV-D / SECTION 11-C
1) SPLICE TO ACHIEVE MINIMUM BREAK STRENGTH OF 35,000 LBS. VERTICAL
2) APPX. EYE LENGTH - 1 FT.
A) INSTALL CORDURA EYE BUFFERS
1) PULL EACH LINE TO 20,000 LBS. VERTICAL - DURATION - 30 SECONDS
REPEAT THIS 10 TIMES, SETTING THE SPLICES, MEASURE AFTER 24 HRS.
4) INSTALL 3/8" UV RESISTANT BUNGEE CORD THROUGH EYES CAUSING TENSION IN ROPE, TO
MAKE
THE 11'-1/2" IDEALLY 9'-1/2"
EACH EYE. TOTAL LENGTH - 74 IN.
A) MAKE APPX 2" EYE BY LOOPING BACK BUNGEE AND SEIZING
WITH #554 POLY THREAD, APPX. SEIZE LENGTH TO BE 3 INCH.
B) INSTALL HEAT SHRINK TUBE OVER SEIZING THREAD.
C) BUNGEE LENGTH TO BE APPROX. 66" LONG FOR USCG TO INSTALL CLAMPS
5) INSTALL CORDURA SLEEVE
A) WHIP LOCK SLEEVE, CENTERED TO THE AMSTEEL LINE.
6) SUPPLY EACH CAPTURE LINE WITH (4) STAINLESS WIRE ROPE CLAMPS 1/4" SIZE #31985T73

PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS:

*****EACH NET MUST BE INDIVIDUALLY PACKAGED ******** IN ACCORDANCE WITH MIL-STD-
2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING,
BLOCKING AND BRACING AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS
1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED
WOODEN BOX. MARKING IAW MIL-STD-129R

Please see attachments

Packaging and shipping cost will be part of the quoted price.