2310--Rehabilitation Vehicle with Modifications Salt Lake City, UT

Request for Quote (RFQ) #: Rehabilitation Vehicle with Modifications (36C25926Q0728) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. The Government reserves the right to make no award from this solicitation. * The deadline for all questions is 12:00pm MST, August 20th, 2026. All questions must be submitted in writing no later than the question cut-off date marked above. All questions will be answered officially through an amendment to the solicitation. ** Quotes are to be provided to stephanie.cahill@va.gov no later than 12:00pm MST, August 27th, 2026. Quotes shall not be hand carried. Faxed quotes shall not be accepted. Emailed quotes are the only method of submitted quotes (4MB email limit). The Government reserves the right to make the award solely on initial Quotes received. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation. This RFQ shall be completed in its entirety, and signed and dated, failure shall not be considered for award. This is a Request for Quote (RFQ), and the solicitation number is 36C25926Q0728. The government anticipates awarding a firm-fixed price contract resulting from this solicitation. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 effective March 17, 2026. The North American Industrial Classification System (NAICS) code for this procurement is 336110 with a business size standard of 1,500 employees. This solicitation is 100% set-aside for small business concerns. List of Line Items; Line Item Description Qty Unit of Measure Unit Price Total Price 0001 Vehicle (minivan configuration) 1 EA $ $ 0002 Modification/conversion system 1 EA 0003 Installation/Modification Labor and Delivery 1 JB Grand Total $ Description of Requirements for the items/Services to be acquired: *Buy American Vendors are strongly encouraged to include quotes with (all) products manufactured within the U.S. whenever possible although quotes with non-domestic products will not be excluded from the solicitation. Vendors are required to complete the FAR 52.225-2 Buy American Certificate below and include with their quote in order to verify the Country of Origin (COO) of products included in their quote. *FOB shall be destination *Freight shall be added to the price of CLIN 0001 and not be its own line item *Cut sheets and specification sheets proving the offered product meets all testing specifications and salient characteristics shall be included with the quote *Quotes shall annotate the expected date of delivery to the specified location *Quotes shall be accompanied by an authorization letter consistent with the requirements of VAAR 852.212-71(c). *Failure to meet the salient characteristics below will result in the offeror s quote not being considered for award. *Failure to provide the required documents or information (information documents, quote with accurate costs, delivery lead time, Buy American certificate, clause VAAR 852.219-76, and/or authorized distributor letter) by the quote deadline will result in the offeror s quote not being considered for award. SALIENT CHARACTERISTICS: Vehicle Base (0001) Minivan configuration (Brand name or equal to Toyota Sienna or Chrysler Pacifica) Capability to have floor removed and replaced with at least a 14 lowered floor (BraunAbility or VMI) Wheelchair accessibility Must be able to accommodate a drop-floor, ramp-kneeling system which meet National Highway Traffic Safety Administration (NHTSA) gross motor vehicle weight capacity. Vehicle size capacity: Minimum space capacity of vehicle: Fits up to 5 passengers in OEM seats. Room for wheelchair users in addition. Cubic feet approximately 200. Link to primary market vendor for previous vehicle modifications: https://www.braunability.com/us/en/mobility-products/wheelchair-accessible-vehicles/chrysler.html Power In Floor Ramp Power Foldout Ramp Power Foldout XT Ramp Door Opening Usable Width A 33.5" 32.375" 32.375" Door Opening Usable Height (at Middle of Door) B 55" 53" 57" Interior Height at Center of Vehicle C 58" 56" 60" Interior Height at Driver/Passenger Position3 D 58" 56" 60" Ramp Length E 51.35" 52" 52" Ramp Width (Usable Clear Opening) F 32.25" 30.125" 30.125" Ramp Angle (with Vehicle Kneeled)4 G 9.9° 9.1° 8.6° Interior Floor Length (Behind Front Seat Strikers) H 71" 71" 71" Overall Interior Floor Length (Flat Area) I 98.5" 98.5" 98.5" Interior Width at Slide Doors (Doors Closed) J 68" 64" 64" Interior Width at B Pillars K 59.75" 62.25" 62.25" Vinyl/Leather Seats Automatic transmission Power sliding-side passenger door Cruise control Tilt steering wheel Power windows Power brakes Power-door locks Power-outside mirrors AM-FM stereo/radio Back up warning system Back up camera Collision warning system Lane departure sensor Blind spot indicator Heavy-duty back-up battery Modification/Conversion Equipment (0002) Ramp: Power (in-floor or folding) ramp with 1000 lb. capacity with switch and remote with LED ramp lighting Sure-Grip Featherlite Evaluator Set with city mode option - employ an electronic accelerator and mechanical brake Right and Left: Push/Right Angle, Push/Rock, Push/Pull, and all Orthotics and Optional Operating Handles 4 Clamshell Steering Device Mounts (for steering knobs at various locations on steering wheel, used to determine optimal steering position) Standard Spinner Knob/Grip Palm Grip Amputee Grip V-Grip/Quad Fork Steering Device Tri-pin Grip Single Pin Foam Grip BB8/RF-BB8 knob with secondary control option Sure-switch 4-way adaptive vehicle secondary function switch Veigel Classic II with Veigel Commander, right-sided hand control MPS or Suregrips Left Foot Accelerator Pedal with pedal block, removable Drop Turn Signal Lever with Mount Turn Signal Lever RH with Bands and Mount Accelerator/Brakes: Left foot accelerator pedal Accelerator guard Instructor brake/ Driver Training Trainer Brake, steering options (steering wheel on instructor side; this can be removed but instructor brake required), and kill switch Parking brake extension Seating: 6-way transfer seat in driver s position Removable seat to facilitate Veteran transfer from wheelchair to driver s seat Safety/Other Proper signage to signal other drivers - Driver in Training/Student Driver Magnetic Signs (Need 3: for the right, left, and rear of vehicle) Mirrors: Various mirrors strategically placed (see below: mirrors used for assessment of patient to as he drives so provider can assess behaviors without looking away from road (eye check mirror). Instructor rear view mirror to scan behind vehicle; Spotter mirrors are on side mirrors and used for blind spot scans) Instructor Eye-Check Mirror/Student Driver Products #177 Instructor Eye-Check Mirror Instructor rear-view mirror (1) Spotter mirrors (2) Mechanism to secure wheelchairs to vehicle floor Receptacle must be available for vehicle seat belt Must include seat belt extension, rigid riser seat belt receptacle, wheelchair securement system, and different sizes of torso positioning belts. Dual back-up battery system Rubberized durafloor/wheelchair compatible flooring with track system for restraint use in passenger, driver, and midshaft positions Four (4) manual and retractable wheelchair tie down system (brand name or equal to Q straint) four point system EZ lock power docking base with quick release button (front passenger seat location) 6-way transfer seat with side-mounted switchbox and hand-held pendant (driver position; removable seat base, roll and release) Brand name or equal to Braunability Seat belt extension Striker plates (to cover driver seat securement slots) LED light for errant brake application by driver (detect if using hand controls and pushing gas/brake simultaneously) Delivery and acceptance are to be F.O.B Destination (RFO 52.247-34) at: George E. Wahlen VA Medical Center 500 Foothill Blvd., Salt Lake City, UT 84148 52.212-1, Instructions to Offerors-Commercial Items applies to this acquisition Any award made as a result of this solicitation will be made on an All or Nothing Basis. State if quoted items are available and priced through offerors existing Government-wide Acquisition Contract (GWAC), GSA Multiple Award Schedule (MAS) contract, or VA-wide Acquisition Contract. If the acquisition is set-aside for SDVOSBs/VOSBs, their socioeconomic status must be verified and visible in the SBA Small Business Certification (SBS): https://search.certifications.sba.gov/ at the time of quote submission AND award, or will be considered non-responsive, and will NOT be considered for award. Offerors are warned against contacting any VA personnel other than the Contracting Officer and Contract Specialist prior to placement of any award made resulting from this RFQ. If such contact occurs and found to be prejudicial to competing contactors, the offeror making such contact may be excluded from award considerations. All proprietary information shall be clearly and properly marked. If the Offeror submits annexes, documentation, attachments or the like, not specifically required by this solicitation, such will count against the Offeror s page limitations unless otherwise indicated in the specific volume instructions below. All information shall be confined to the appropriate file. The offeror shall confine submissions to essential matters, sufficient to define the quote and provide an adequate basis for evaluation. Offerors are responsible for including sufficient details, in a concise manner, to permit a complete and accurate evaluation of each quote. ADDENDUM to RFO 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL Submission of quote shall include the following volumes: (I) Technical capability or quality of the item offered to meet the Government requirement; (II) Price; (III) Delivery Lead Time; (IV) Buy American Certificate; and (V) Letter of Authorized Distributor (VAAR 852.212-71 (c), as applicable. Volume I - Technical capability or quality of the item offered to meet the Government requirement The offeror shall submit specifications, cut sheets, or brochures confirming the equal products, including equal products of the brand name manufacturer submitted, meets or exceeds the salient physical, functional, or performance characteristic specified in this solicitation. The product(s) quoted must be identified by brand name, if any, and make or model number. Volume II Price Price - The offeror shall complete the pricing schedule provided in Section (v) above: Price/Cost Schedule. Volume III Delivery Lead Time The offeror shall state the required number of calendar days to deliver the item, to include installation, if applicable. Volume IV Buy American Certificate The offeror shall complete and submit the included 52.225-2 Buy American Certificate. Volume V Letter of Authorized Distributor If the offeror is not an OEM, then the offeror shall submit a verifying authorization letter or other documents from the OEM consistent with the requirements of VAAR 852.212-71(c). Verifying letter must be from the OEM specifying the offeror is authorized to distribute and/or resell products. (End of Addendum to 52.212-1) 52.212-2, Evaluation--Commercial Items applies to this acquisition. ADDENDUM to RFO 52.212-2 EVALUATION COMMERCIAL ITEMS: The Government will award a contract resulting from this solicitation to the offeror responsible whose offer conforming to the solicitation will be most advantageous to the Government considering price and other factors. The following factors shall be used to evaluate quotations: Factor 1. Technical capability or quality of the item offered to meet the Government requirement Factor 2. Price Factor 3. Delivery Lead Time Factor 4. Submission of Buy American Certificate Factor 5. Submission of Authorized Distributor Letter Evaluation Approach. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government will use comparative analysis. The following factors will be used to evaluate offers: Factor I. Technical capability or quality offered to meet the Government requirement: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Factor 2. Price: The Government will evaluate the price by adding the total of all line item prices. The Government may use various price analysis techniques and procedures to make a price reasonableness determination. Offers that do not meet or exceed the technical capability or quality of the item offered to the Government requirement shall not be selected regardless of price. Factor 3. Delivery Lead Time: The Government will evaluate delivery lead time in addition to other evaluation factors specified above and select the quoter/offer whose bid is most advantageous to the Government. Factor 4. Submission of completed Buy American Certificate: The Government will evaluate the information provided in the completed Buy American Certificate for compliance with FAR Part 25. Priority may be given to products made in the US. Factor 5. Submission of Authorized Distributor Letter: Vendor eligibility will be determined in addition to other evaluation factors above by the submission of a proper OEM letter (see VAAR 852.212-71(c)) from the manufacturer of the products included in the quote. **The Government may consider an award to other than the lowest priced quoter/offeror if it s in the best interest of the Government.** If offeror does not provide all volumes as outlined in RFO 52.212-1 Instructions, the offer may be considered non-responsive. (End of Addendum to 52.212-2) 52.212-4, Contract Terms and Conditions--Commercial Items applies to this acquisition Any inconsistencies in this solicitation or contract shall be resolved by giving precedence IAW 52.212-4(r). By submitting a quote, the offeror understands that quotes will not be referenced in 1449 and clauses incorporated in the solicitation will dictate the contract. All offerors shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under the contract IAW RFO 52.212-4(q). The Government reserves the right to deny requests for clause changes that are not included in this solicitation should the request be inconsistent with the RFO or VAAR. The following RFO clauses are incorporated by reference: Applicable (X) Number Title Source X 52.203-6 with Alt I Restrictions on Subcontractor Sales to the Government Statute X 52.203-13 Contractor Code of Business Ethics and Conduct Statute X 52.203-17 Contractor Employee Whistleblower Rights Statute X 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements Statute X 52.204-9 Personal Identity Verification of Contractor Personnel Other X 52.204-13 System for Award Management Maintenance Statute 52.204-91 Contractor identification Other X 52.209-6 Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment Statute X 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters Statute X 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations Statute 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns Statute X 52.219-6 Notice of Total Small Business Set-Aside Statute 52.219-6 with Alt I Notice of Total Small Business Set-Aside, with Alternate I Statute X 52.219-8 Utilization of Small Business Concerns Statute 52.219-9 Small Business Subcontracting Plan Statute 52.219-9 with Alt I Small Business Subcontracting Plan, with Alternate I Statute 52.219-9 with Alt II Small Business Subcontracting Plan, with Alternate II Statute 52.219-9 with Alt III Small Business Subcontracting Plan, with Alternate III Statute 52.219-9 with Alt IV Small Business Subcontracting Plan, with Alternate IV Statute 52.219-14 Limitations on Subcontracting Statute 52.219-16 Liquidated Damages Subcontracting Plan Statute 52.219-33 Nonmanufacturer Rule Statute X 52.222-3 Convict Labor EO X 52.222-19 Child Labor Cooperation with Authorities and Remedies EO X 52.222-35 Equal Opportunity for Veterans Statute 52.222-35 with Alt I Equal Opportunity for Veterans, with Alternate I Statute X 52.222-36 Equal Opportunity for Workers with Disabilities Statute 52.222-36 with Alt I Equal Opportunity for Workers with Disabilities, with Alternate I Statute X 52.222-37 Employment Reports on Veterans Statute X 52.222-40 Notification of Employee Rights Under the National Labor Relations Act EO X 52.222-41 Service Contract Labor Standards Statute X 52.222-42 Statement of Equivalent Rates for Federal Hires Employee Class Monetary Wage-Fringe Benefits _____________ __________________________ _____________ __________________________ Statute X 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) Statute 52.222-44 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment Statute X 52.222-50 Combating Trafficking in Persons Statute 52.222-50 with Alt I Combating Trafficking in Persons, with its Alternate I Statute 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Requirements Other 52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services Requirements Other X 52.222-54 Employment Eligibility Verification EO X 52.222-62 Paid Sick Leave Under Executive Order 13706 EO 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items Statute 52.223-9 with Alt I Estimate of Percentage of Recovered Material Content for EPA-Designated Items, with Alternate I Statute 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons Statute 52.223-12 Maintenance Statute 52.223-20 Aerosols Statute 52.223-21 Foams Statute X 52.223-23 Sustainable Products and Services Statute 52.224-3 Privacy Training Statute 52.224-3 with Alt I Privacy Training, with Alternate I Statute X 52.225-1 Buy American-Supplies Statute 52.225-1 with Alt I Buy American-Supplies, with Alternate I Statute 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act Statute 52.225-3 with Alt II Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate II Statute 52.225-3 with Alt III Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate III Statute 52.225-3 with Alt IV Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate IV Statute 52.225-5 Trade Agreements Statute 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States Other 52.225-26 Contractors Performing Private Security Functions Outside the United States Statute 52.226-4 Notice of Disaster or Emergency Area Set-Aside Statute 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area Statute X 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving EO 52.229-12 Tax on Certain Foreign Procurements Statute 52.232-29 Terms for Financing of Commercial Products and Commercial Services Statute 52.232-30 Installment Payments of Commercial Products and Commercial Services Statute X 52.232-33 Payment by Electronic Funds Transfer System for Award Management Statute 52.232-34 Payment by Electronic Funds Transfer Other than System for Award Management Statute 52.232-36 Payment by Third Party Statute X 52.232-40 Providing Accelerated Payments to Small Business Subcontractors Statute 52.232-90 Fast Payment Procedure Statute X 52.233-3 Protest After Award Statute X 52.233-4 Applicable Law for Breach of Contract Claim Statute X 52.240-91 Security Prohibitions and Exclusions Statute 52.240-91 with Alt I Security Prohibitions and Exclusions, with Alternate I Statute 52.240-92 Security Requirements Other 52.240-92 with Alt II Security Requirements with Alternate II Other 52.240-93  Basic Safeguarding of Covered Contractor Information Systems   X 52.244-6 Subcontracts for Commercial Products and Commercial Services Statute 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels Statute 52.247-64 with Alt I Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate I Statute 52.247-64 with Alt II Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate II Statute Additional contract requirements or terms and conditions: 52.217-8 Option to Extend Services (NOV 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to the prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days. 52.222-90 Addressing DEI Discrimination by Federal Contractors Addressing DEI Discrimination by Federal Contractors (Deviation DATE) Definitions. As used in this clause Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor. Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources. (b) In connection with the performance of work under this contract, the Contractor agrees as follows: The Contractor will not engage in any racially discriminatory DEI activities; (2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause; (3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts; (4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and (5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause. (6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4). (c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States. (End of clause) 52.225-1 Buy American Supplies (OCT 2022) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101; Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105. Domestic end product means For an end product that does not consist wholly or predominantly of iron or steel or a combination of both An unmanufactured end product mined or produced in the United States; An end product manufactured in the United States, if The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of cost of components . End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (OCT 2022). As prescribed in 25.1101(a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): (A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. (End of Clause) 52.225-2 Buy American Certificate (OCT 2022) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, domestic end product, end product, and foreign end product are defined in the clause of this solicitation entitled Buy American Supplies. Foreign End Products: Line item No. Country of origin Exceeds 55% domestic content (yes/no) 0001: Vehicle (minivan configuration) 0002: Modification/conversion system 0003: Installation/Modification Labor and Delivery N/a - Services N/a - Services [List as necessary] (c) Domestic end products containing a critical component: Line item No. [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of Provision) 852.204-70 Personnel Identity Verification of Contractor Personnel (MAR 2026) The Contractor shall comply with current Department of Veterans Affairs policy for personal identity verification of all employees performing under this contract when physical access to VA facilities, and/or logical access to VA information and VA information systems is required. The Contractor shall insert this clause in all subcontracts when the subcontractor s employees will require physical access to VA facilities and/or logical access to VA information and VA information systems. (End of clause) 852.204-72 Personnel Identity Verification of Contractor Personnel (MAR 2026) Definitions. As used in this clause VA Information system is the same as information system and means, pursuant to 38 U.S.C. 5727, a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information whether automated or manual. VA sensitive information means all VA data, on any storage media or in any form or format, which requires protection due to the risk of harm that could result from inadvertent or deliberate disclosure, alteration, or destruction of the information and includes sensitive personal information. The term includes information where improper use or disclosure could adversely affect the ability of VA to accomplish its mission, proprietary information, records about individuals requiring protection under various confidentiality provisions such as the Privacy Act and the HIPAA Privacy Rule, and information that can be withheld under the Freedom of Information Act. Examples of VA sensitive information include the following: individually-identifiable medical, benefits, and personnel information; financial, budgetary, research, quality assurance, confidential commercial, critical infrastructure, investigatory, and law enforcement information; information that is confidential and privileged in litigation such as information protected by the deliberative process privilege, attorney work-product privilege, and the attorney client privilege; and other information which, if released, could result in violation of law or harm or unfairness to any individual or group, or could adversely affect the national interest or the conduct of Federal programs. General. Contractor personnel assigned to work for or on behalf of VA must undergo a background investigation commensurate with the risk and sensitivity level designation associated with the work to be performed at the level indicated in the contract. The Contractor and subcontractors shall comply with VA Directive/Handbook 0710, Personnel Security and Suitability Program, which can be accessed at: https://vaww.va.gov/vapubs/index.cfm Risk and Sensitivity Levels. The following table identifies the risk and sensitivity levels that apply to any personnel providing services under this contract. *VA Administrations, organizations and staff offices will use the OPM Position Designation Tool. Positions/Tasks Designated as Non-Sensitive Positions - Tier 1/Low Risk N/a Positions/Tasks Designated as Non-Sensitive Positions- Tier 2/Mod Risk N/a Positions/Tasks Designated as Non-Sensitive Positions - Tier 4/High Risk N/a Security clearances are granted to individuals with a specific requirement for access to classified material (for example, Confidential, Secret and Top Secret). Contractor personnel that are required to obtain a security clearance will be subject to a Tier 3 or Tier 5 investigation. The following sensitivity designations have been assigned for the identified Tier 3 and Tier 5 required by this contract: Tier 3: Not Applicable Tier 5: Not Applicable Fitness. The results from a background investigation are used to determine if an individual s fitness is sufficient for that individual to perform work for or on behalf of VA in the position identified in this contract. Contractor fitness determinations are made in accordance with 5 CFR Part 731.202. Fitness requirements for employment are separate and distinct from job qualifications. If a Contractor or subcontractor employee is found to be unsuitable or unfit to provide services under this contract, the Contractor shall immediately remove the employee from working on this contract and take those necessary steps that restrict the employee s logical access to VA data, information, VA sensitive information, or information technology or VA information systems containing such data or information. The Contractor shall advise the employee that they are not permitted to access any VA controlled building or real property in relation to this contract. The removal of an unfit Contractor or subcontractor employee does not alleviate the Contractor from satisfying the requirements of this contract. The Government will not reimburse the Contractor for any costs associated with the recruitment/replacement of an employee or subcontractor employee who is found to be unfit. Identification Cards. The Government will provide a Personal Identification Verification (PIV) card or other identification card, as necessary, to fit Contractor personnel who require physical access to VA facilities and/or logical access to VA data, information, VA sensitive information, or information technology or VA information systems containing such data or information. Contractor and subcontractor personnel shall prominently display their PIV/identification card on their persons while working at a VA facility and shall present their PIV/identification card for inspection upon request by a VA official. The Contractor must surrender the employee or subcontractor employee s PIV/identification card in accordance with the requirements set forth in Directive/Handbook 0735 when any of the following events occur: When no longer needed for contract performance. Upon completion of the Contractor/subcontractor employee s employment. Upon contract completion or termination. Lost/stolen. Immediately upon detection, the Contractor shall report a lost or stolen PIV/identification card to the Government authorities as identified in Directive/Handbook 0735. Within 48 hours of reporting the lost/stolen PIV/identification card, the Contractor shall submit to the Program Manager an incident report that describes the relevant facts and circumstances regarding the loss/theft. If the loss/theft was reported by the Contractor to the local police, the Contractor shall further submit a copy of the final police report to the Program Manager within 48 hours of the report being made available by the local police department. The Government will not reimburse the Contractor for any costs that result from lost/stolen PIV/identification card(s). Regular Reporting. The Contractor shall submit a status report to PIV Sponsor within 5 working days after the end of each calendar quarter and as requested by the Government in order to initiate contract closeout procedures. The report must provide the status of each contractor/subcontractor employee who is required to have a PIV/identification card during the performance of the contract. The report shall identify the Contractor and the contract number, and list the following status for each contractor/subcontractor employee who holds a PIV/identification card under this contract: Contractor/subcontractor employee name. Name of VA facility where Contractor/subcontractor employee works, if applicable. Date background check submitted for Contractor/subcontractor employee. Date PIV/identification card issued to Contractor/subcontractor employee. Contractor/subcontractor employee s PIV/identification card number, as applicable. Date Contractor/subcontractor employee no longer has need for PIV/identification card. Date Contractor notified VA that PIV/identification card is no longer required. Date Contractor returned PIV/identification card was returned to VA. Flow down of clause. The Contractor shall include the substance of this clause in subcontracts, third-party agreements, and BAA s, in which subcontractors, third-party servicers/employees, and business associates will perform functions where they will have physical access to a VA facility or logical access to VA data, information, VA sensitive information, or information technology or VA information system containing such data or information. (End of clause) 852.252-70, Provisions and Clauses Applicable to VA Acquisition of Commercial Items: VAAR Clauses are incorporated by reference as follows: VAAR 852.203-70 Commercial Advertising (MAY 2018) VAAR 852.232-72 Electronic Submission of Payment Requests (NOV 2018) VAAR 852.246-71 Rejected Goods (OCT 2018) VAAR 852.222-71 Compliance with Executive Order 13899. (DEVIATION) (APR 2025) VAAR Provisions are incorporated as follows: VAAR 852.233-70 Protest Content/Alternative Dispute Resolution (OCT 2018) VAAR 852.233-71 Alternate Protest Procedure (OCT 2018) VAAR 852.204-70 Personal Identity Verification of Contractor Personnel (MAR 2026) VAAR 852.204-72 Personnel Vetting and Credentialing (MAR 2026) RFO 52.252-1 Solicitation Provisions Incorporated by Reference The following provisions or clauses incorporated by reference in this solicitation must be completed by the offeror or prospective contractor and submitted with the quotation or offer. Copies of these provisions or clauses are available on the Internet at the web sites provided in the provision at RFO 52.252-1, Solicitation Provisions Incorporated by Reference. Copies may also be obtained from the contracting officer. http://www.acquisition.gov/far/index.html https://www.acquisition.gov/vaar The following RFO provisions are to be incorporated by reference: Applicable (X) Number Title Source X 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions Statute X 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation Statute X 52.204-7 System for Award Management Registration Statute 52.204-7 with Alt I System for Award Management Registration, with Alternate I Statute 52.204-90 Offeror Identification Statute 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) Statute 52.209-12 Certification Regarding Tax Matters Statute 52.219-2 Equal Low Bids Statute 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products E.O. 52.222-48 Exemption from Application of the Service Contract Labor Standards for Maintenance, Calibration, or Repair of Certain Equipment Certification Other 52.222-52 Exemption from Application of the Service Contract Labor Standards for Certain Services-Certification Other 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan Statute X 52.222-90 Addressing DEI Discrimination by Federal Contractors E.O. 52.223-4 Recovered Material Certification Statute X 52.225-2 Buy American Certificate Statute 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate Statute 52.225-6 Trade Agreements-Certificate Statute 52.225-20 Prohibition on Conducting Restricted Business Operations in Sudan-Certification Statute 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications Statute 52.226-3 Disaster or Emergency Area Representation Statute X 52.229-3 Federal, State, and Local Taxes Statute 52.229-11 Tax on Certain Foreign Procurements Notice and Representation Statute X 52.240-90 Security Prohibitions and Exclusions Representations and Certifications Statute The Defense Priorities and Allocations System (DPAS) does not apply. Date and Time offers are due to stephanie.cahill@va.gov by 12:00pm MST, August 27th, 2026. Name and email of the individual to contact for information regarding the solicitation: Stephanie Cahill Stephanie.Cahill@va.gov