This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees. REQUIREMENT : This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC HICKORY (WLB 212). USCGC HICKORY (WLR-WLB 212) DRYDOCK AVAILABILITY FY27. ANTICIPATED NAICS CODE/SIZE STANDARD : The applicable NAICS Code is 336611 , Ship Building and Repairing and the size standard is 1,300 employees. GEOGRAPHICAL RESTRICTION: YES, SUBJECT TO U.S COAST GUARD DISTRICT 14 - HAWAII MILITARY CONSIDERATION MEMORANDUM PLACE OF PERFORMANCE: Contractor’s Facility DESCRIPTION OF WORK: This requirement is for the contractor to provide all necessary facilities, materials, equipment, personnel, and other such things necessary to perform Dry-dock repairs to the U.S. Coast Guard Cutter (USCGC) HICKORY (WLB 212). This vessel’s homeport is Coast Guard Station Apra Harbor Guam 96915. All work is to be performed at the Contractor’s facility. The required performance period is 84 days. The performance period is 15 July 2027 – 07 October 2027 to accommodate Coast Guard cutter operational needs. Description: This Dry Dock will consist of approximately one hundred and ten (110) work items, not limited to: hull plating ultrasonic testing, underwater body preserve, propeller removal and inspect, propulsion shaft remove, inspect and reinstall, rudders remove, inspect, reinstall and preserve, construction deck 100% preserve, tanks clean and inspect, and boat davit inspect. ITEM DESCRIPTION D-001 Fire Prevention Requirements «TYPE» D-002 Hull Plating, U/W Body, Inspect D-003 Hull Plating, U/W Body, Ultrasonic Testing O-004 U/W Body, Preserve, 100 percent O-005 U/W Body, Preserve, Partial, Condition A O-006 U/W Body, Preserve, Partial, Condition B O-007 U/W Body, Preserve, Partial, Condition C D-008 Hull Plating, Freeboard, Ultrasonic Testing O-009 Hull Plating Freeboard, Preserve, 100 Percent O-010 Hull Plating Freeboard, Preserve, Partial O-011 Hull Plating Freeboard (Buoy Port Areas), Preserve O-012 Hull and Structural Plating, General, 10.2 lbs. Steel, Renew O-013 Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew O-014 Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew O-015 Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew O-016 Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew O-017 Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew O-018 Hull And Structural Plating, General, Cracked Steel Welds, Repairs O-019 Hull and Structural Plating, General, Degraded Weld, Steel, Repair D-020 Cathodic Protection, Zinc Anodes, Renew D-021 Impressed Current, Cathodic Protection System and Reference Cell Anodes, Renew D-022 Impressed Current Cathodic Protection System, Inspect and Maintain D-023 Appendages, U/W, Leak Test O-024 Appendages, U/W, Internal, Preserve O-025 Chain Locker, Preserve, 100 Percent D-026 Voids, Non-Accessible, Leak Test O-027 Voids, Non-Accessible, Internal Surfaces, Preserve O-028 Accessible Voids, Preserve, 100 Percent O-029 Accessible Void(s), Preserve, Partial D-030 Propulsion Shaft Fairwaters And Rope Guards, Inspect D-031 Grey Water Holding Tanks, Clean and Inspect O-032 Tanks, Grey Water Holding, Preserve, 100 Percent O-033 Tanks, Grey Water Holding, Preserve, Partial D-034 Sewage Holding Tanks, Clean and Inspect O-035 Tanks (Sewage Holding), Preserve, 100 percent O-036 Tanks (Sewage Holding), Preserve, Partial D-037 Sewage Piping, Clean and Flush D-038 Tanks, Potable Water, Clean and Inspect O-039 Tanks, Potable Water Preserve, 100 Percent O-040 Tanks, Potable Water, Preserve, Partial D-041 Tanks, Ballast, Clean and Inspect O-042 Tanks, Ballast, Preserve, 100 Percent O-043 Tanks, Ballast, Preserve, Partial D-044 Tanks, MP Fuel Service, Clean and Inspect O-045 Tanks, MP Fuel Service, Preserve, Partial D-046 Propulsion Shafting; Remove, Inspect, and Reinstall D-047 Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal D-048 Propulsion Shaft Bearings, External, Check Clearances O-049 Propulsion Tail Shaft Sleeve, Skim Cut O-050 Propulsion Shaft Bearing, Stave Renewal O-051 Stern Tube Interior Surfaces, Preserve, 100 Percent D-052 Controllable Pitch Propellers, Clean and Inspect D-053 Controllable Pitch Propeller, System Maintenance, Perform D-054 Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform D-055 Controllable Pitch Propeller Hub, Remove and Reinstall D-056 Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean D-057 Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean D-058 Vent Ducts, Engine And Motor Room, All, Commercial Cleaning D-059 Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning D-060 Vent Ducts, Laundry Exhaust, Commercial Cleaning D-061 Vent Ducts, All Other, Commercial Cleaning O-062 Sea Valves and Waster Pieces, Overhaul Or Renew O-063 Sea Strainers, Duplex, All Sizes, Overhaul O-064 Sea Strainers, Simplex, All Sizes, Clean and Inspect D-065 Sea Strainers, All Sizes, Renew D-066 Sea Bay, Clean and Inspect O-067 Sea Bay, Preserve 100% D-068 Compressed Air Receivers and System Valves, All, Clean, Inspect, Hydro and Lift D-069 Rudder, Inspect And Repair O-070 Rudder Bearings, Renewal O-071 Rudders, Preserve, 100 Percent D-072 Rudder Stock Bearings, Check Clearances D-073 Rudder and Rudder Stock, Remove and Inspect O-074 Thruster Units (Bow And Stern), Overhaul O-075 Thruster Unit Bearings, Renew D-076 Hydraulically Operated Cargo Hatch, Inspect and Service D-077 Hull Fittings (Mooring and Towing), Inspect and Test D-078 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test D-079 Hydraulic Chain Stoppers, Inspect and Service D-080 Mechanical Chain Stoppers, Inspect and Service D-081 Crossdeck Winches, Inspect and Service D-082 Hydraulic Inhaul Winch, Inspect And Service D-083 Anchor Windlass, Inspect and Service D-084 Anchor Chains and Ground Tackle, Inspect and Repair D-085 Warping Capstan, Inspect and Service D-086 Single Point Davit, Inspect and Service O-087 Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul D-088 Decks – Exterior (Buoy or Construction Deck), Preserve 100% D-089 Heat Exchangers, Clean, Inspect And Hydro D-090 Fathometer Transducer, General Maintenance D-091 Fixed CO2 FF Bottles, Inspect and Hydrostatic Test O-092 Superstructure, Preserve, Partial D-093 Drydock D-094 Temporary Services, Provide - Cutter D-095 Sea Trial Performance, Support, Provide D-096 Watertight Doors and Scuttles, External, Renew D-097 Anchor Chain and Ground Tackle, Preserve D-098 SORS Cargo Rail Remove D-099 Buoy Crane, Appleton EB600-60-40, Inspect and Service D-100 Deck Covering (Interior Wet/Dry), Renew D-101 Port Pilothouse Window, Renew D-102 Pilot House Windows and Frame, Repair and Reseal D-103 Piping Insulation, Renew D-104 Incinerator Room Plating, Repair D-105 Pilot House Weathertight Door, Renew D-106 Sewage Piping, Renew D-107 Fly Bridge Kickpipes, Renew D-108 Deck Covering, Carpet Remove, Renew D-109 Shower Pan, Inspect and Renew D-110 Decks - Potable Water Pump Room and Passageway, Preserve ANTICIPATED PERIOD OF PERFORMANCE: 15 July 2027 through 07 October 2027 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 84 calendar day period of performance. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Sam.Gov announcement with the following information/documentation: Ou Saephanh @ Ou.T.Saephanh@uscg.mil and Sandra Martinez @ Sandra.A.Martinez@uscg.mil no later than 8:00 AM Pacific Time 17 December 2026 , with all of the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company. a. If claiming 8(a) status , provide a copy of your 8(a) Certificate from SBA. b. If claiming HUBZone status , provide a copy of your HUBZone Certificate from SBA. c. If claiming SDVOSB status , provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million. f. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status , provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition .