J061--Preventive Maintenance for Emergency Generators for the Togus VA Medical Center

Description This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) part 12, Acquisition of Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, dated 3/13/2026. This solicitation is SDVOSB set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310, with a small business size standard of $12.5 million. The FSC/PSC is J061. The Togus VA Medical center located at 1 VA Center in Augusta, ME 04330 is seeking to purchase a Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services, with four (4) one year option periods. Wage Determination 2015-4009, Rev 33 is applicable. Statement of Work 1.0 INTRODUCTION The work includes but is not limited to: Provide all equipment, fluids, tools, labor, and to perform regular and periodic examination as stated below, semi-annual and annual preventative, 6 hour emergency call back diagnosis and repairs (subject to additional costs) of the emergency generator systems at the VA Medical Center in Augusta, ME located at 1 VA Center. For the purposes of this contract, 6 hour emergency call back is defined as repair service required to bring a generator back to an operational status after failure of any generator component rendering it inoperable for purposes of supplying backup power as designed. The proposed term of the service is one year from the date of the award. There will be four additional renewal option years to be awarded annually aligned with FAR 52.217-9. 2.0 DEFINITIONS/ACRONYMS Engineer (ing) - Supervisor or designee. CO - Contracting Officer COR - Contracting Officer's Representative. WHEN Hours- Weekends, Holidays, Evenings, and Nights. Anytime outside of Normal Business Hours (Monday-Friday 7:00am-4:30pm) ESR - Engineering Service Report. A documentation of the services rendered for each incidence of work performance under the terms and conditions of the contract. Authorization Signature - COR signature; indicates work status is accepted as stated in ESR. VAMC - Department of Veterans Affairs Medical Center. PM- Preventive Maintenance 3.0 EQUIPMENT TABLE See Attachment 1 VA Maine Generators Please note, not all Generators are located on the Togus Campus. We have 1 mobile unit at 35 State Hospital Dr. in Bangor, ME and another mobile unit at 15 Challenger Dr, Lewiston, ME. Please note all generators are due for battery replacement in 2029. Mobile Generators are subject to change location 4.0 SCOPE This project includes the following tasks: 4.1 Task 1 Scheduled preventative maintenance: Provide regularly scheduled annual and semi-annual preventative maintenance services for all the emergency generator systems at the Medical Center noted in the equipment table. Service includes the following at the minimum or Manufacture requirements whichever is greater. 1. SEMI-ANNUAL CHECK (ENGINE NOT RUNNING) a. Conduct visual check around the generator. b. Check the battery s liquids specific gravity, do battery load test, top up\fill if necessary. c. Clean battery terminals and lugs. d. Check all V and fan belts to make sure there are no hair line cracks on the belts, replace if cracked or worn. e. Check and adjust tension on all V and fan belts. f. Check coolant level and top off\fill if necessary. g. Check specific gravity of coolant. Replenish as necessary to maintain manufacturers recommended level and specific gravity of coolant additive. h. Check operation and components of water jacket heating system. i. Test fuel day tanks for water. Record water levels in tanks. j. Drain condensate from exhaust condensate trap. k. Clean air filter element. Inspect all fuel, oil, and water piping for secure mounting. l. Inspect exhaust piping and muffler insulation. m. Inspect crankcase breather tube. n. Check all control panel indication LED s. 2. SEMI-ANNUAL CHECK (ENGINE RUNNING) a. Turn off the generator circuit breaker and run the generator unloaded for 15 minutes. Check the generator for unusual conditions, such as: excessive vibration, excessive black or white smoke. The following indicators on the control panel also need to be checked and verified while the generator is running: fuel level, oil pressure, water temperature, rpm, voltage, and frequency. b. With the engine running and the generator circuit breaker open: i. Jumper water temperature switch ii. Jumper oil pressure switch iii. Jumper coolant low-level switch c. Press emergency stop push button. i. Each time the switch is jumped or the emergency stop button is pressed the engine should stop and the corresponding failure lamp should illuminate. Reset the shut-down mechanisms after each test. d. Read and record verify all engine and alternator indicators. e. Check exhaust for excessive black or white smoke. (See manufacture s manual) f. Check turbocharger for vibrations, check for any abnormal noise during operation. g. Check generator bearing for noise and overheating. h. Check exhaust manifold, muffler, and piping for leaks and secure mountings. i. Check fuel day tank for overheating. j. Check exhaust backpressure at the Diesel particle filter (Dpf.), if above 24 Inches H20 / 6 kPa, Dpf filters to be removed and cleaned. Or in accordance with the manufacturer s recommendations. 3. SEMI-ANNUAL CHECK (ENGINE STOPPED AFTER RUNNING) a. Inspect engine water, fuel, and oil systems for leaks while engine is hot. b. Fill out maintenance checklist and report deficiencies. c. Confirm that circuit breaker is in closed position, and generator is set in automatic. 4. SEMI-ANNUAL CHECK (ENGINE NOT RUNNING) a. Change fuel and air filters every 250hrs or once a year whichever is sooner b. Change coolant filters every 250hrs or once a year whichever is sooner c. Inspect battery charging Alternator and V belt. d. Inspect engine and generator wiring harness for wear and damages. e. Inspect supports and spring isolators for soundness and stability. f. Inspect unit thoroughly for loose fasteners. g. Clean radiator air passages and exhaust air ducts. h. Clean intake louvers and ducts. i. Inspect unit for corrosion. If corrosion is found technician will notate and bring it to the attention of the VA. j. Inspect fan drive idler pivot arm assembly and shock absorber. k. Inspect Belt driven fan hub. l. Take fuel oil samples, analyze and report composition and cleanliness. 5. ANNUAL CHECK (ENGINE RUNNING) a. Perform complete semi-annual Engine running schedule (Section 2). 6. ANNUAL CHECK (ENGINE STOPPED AFTER RUNNING). a. Perform complete semi-annual Engine stopped after running schedule. (Section 3). b. Change crankcase oil and filters every 250 hours or once a year, whichever is sooner. c. Fill out maintenance checklist and report deficiencies. d. Confirm that circuit breaker is in closed position, and generator is set in automatic. 7. OUT YEAR CHECKS a. Second Year Checks: i. Inspect Turbocharger: 1. Inspection to include bearings, seals, exhausts, and air impellers. 2. Inspect all gaskets and seals, provide estimate if replacement is needed. ii. Inspect Rotating rectifier: 1. Inspect and clean rotating rectifier per manufacturer s recommendations. 2. If replacement is warranted, provide a written recommendation to the COR for action to include all material and labor. 1. Replace batteries in 2029 with minimum Caterpillar Deep Cell batteries per manufacturer s recommendations. 2. Provide batteries for each generator, replace with factory required quantity/specification. 3. Replace cooling system temperature regulators with seals. 4.2 Task 2 Repairs and Emergency Call Back Service: 1. Contractor shall have technician on site within six (6) hours, during normal business hours and six (6) hours, during WHEN hours of request by telephone or otherwise from contacting officer, Chief Engineer and/or designees for emergency services. Response will be in the event of a shut down or emergency trouble developed between regularly scheduled maintenance services. Overtime emergency call back service shall be limited to minor adjustments and repairs required to protect and provide immediate safety of the equipment and persons in and about the generators. 2. The contractor to provide estimates for all non-preventative maintenance repairs. Supplemental non-preventative maintenance repair estimates to be reviewed and approved by the VA. The emergency generator systems of the medical center must remain operational 24/7. Alternative measures for providing equivalent emergency power during repairs are the responsibility of the VA. 3. Repairs shall be completed promptly after the need for repair has been identified, estimated and approved by the VA or by the Government. All repairs shall be in accordance with the equipment manufacturer s requirements and\or applicable laws, regulations, codes, etc. a. An extension may be granted at the discretion of the COR on a case by case basis. Each request for an extension must include an explanation for the delay, and estimated time of completion, and evidence to clearly show that the contractor has made every effort to repair the system as timely as possible. 4. The Contractor shall furnish all supplies, materials, and equipment to perform regularly scheduled service. Emergency service and repairs are to be billed at an additional cost to the contracted price. a. All parts and materials shall be of the original manufacturer s design and specification, or equal thereto. b. The Contractor shall have and maintain on hand locally a supply of spare parts enough for normal maintenance and expedient emergency repairs of the generators. c. Repairs to be quoted as a cost above the contracted price. VA approval is needed before contractor can proceed with any supplemental repairs. 5. Space is not available for storage of equipment or materials. If needed the Contractor should make arrangements for storage as part of this contract. 5.0 PERFORMANCE REQUIREMENTS 1. The Contractor, under this Scope of Work (SOW), will be responsible for all supervision, labor, tools, lubricants, cleaning products, and manufacturer replacement parts and equipment required to carry out all services as outlined in this SOW. The medical center is considered a critical facility; therefore, all emergency generator equipment shall be kept in first class condition and proper working order 24/7. 2. The Contractor will be required to evaluate the existing equipment and provide the COR with a proposed maintenance schedule in advance of service. 3. Contractor must submit to the COR for review, work sheet/checklist that will be used for performing and documenting maintenance service. 4. All personnel working in the vicinity shall wear and /or use safety protection equipment and exercise the appropriate cautions while all work is performed. Any questions or injuries shall be brought to the attention of the COR, and Safety Manager or Safety Officer. 5. Material data sheets (MDS) shall be provided by the contactor for all HAZMAT materials. Copies will be provided to the COR for approval. No materials will be allowed to be brought on site until they have been submitted and approved by the COR in advance. 6. Preventive maintenance for Standby generator sets to be performed by a technician or mechanic, who is manufacturer certified to work on Caterpillar and other Diesel manufactured emergency generators as listed above. 7. All off site calibration of generator components to be performed by an authorized Caterpillar repair location, a calibration certificate for each calibrated component must be issued. 8. Perform all annual preventive maintenance procedures prior to beginning out-year cycles. 9. COR must immediately be made aware of any condition discovered that could result in equipment failure. 10. Testing and inspection summary report shall be submitted to the COR within three days of completing all work. 11. If any discrepancies are found with the generator system that are not covered under this scope of work, then the contractor must provide the following: I. Detailed report noting the discrepancy found. II. Bill of Materials (BOM) to include component name, quantity, part #, and assumption of price for any repair material required and material lead time. 12. All work shall be completed during normal business hours in conjunction with the medical center regularly scheduled monthly generator testing, unless called back for emergency service outside of normal business hours. Emergency call back services shall be assumed to be completed during WHEN hours. 13. All travel costs associated with performance of this contract are the responsibility of the Contractor and are provided at no additional cost to the government as part of this contract. Travel costs are defined but not limited to time and vehicle costs for personnel in travel to and from job site for all duties outlined in this specification, normal shipping charges on any parts or materials covered by this contract, costs associated with the normal shipping of parts or equipment out for repair that are covered under this contract, etc. 14. The services shall be completed in accordance with the latest National Electrical Code (NEC), and National Fire Protection Association (NFPA) standard, VA Standards and policies, and local and city codes. In the event there is conflict between any of the standards/codes, the more stringent standard/code shall apply. Clarification for conflicts must be requested in advance of the service rendered. 15. Contractor shall comply in accordance with all OSHA Safety Guidelines. 16. Upon arrival at the medical center, the Contractor shall check in with the maintenance scheduler, COR or designee. Contractor shall sign in and out in engineering during normal business hours. During WHEN hours the Contractor shall sign in and out at the Boiler Plant. While on property the contractor shall always display an appropriate contractor badge . 6.0 DELIVERABLES 1. Submittal of proposed maintenance schedule of activities for review and approval by the COR. 2. Submittal of proposed equipment and materials to be used on site for review and approval by the COR. 3. Submittal of Contractor safety plan and lock\out tag\out plan. 4. Submittal of material Data Sheets (MDS) shall be provided by the contactor for all chemicals proposed to be brought to the medical center. Chemicals must be approved before they can be located on property. 5. Submittal of all maintenance reports. Must be submitted within 3 days of service completion date. Reports should include at a minimum: a. Name and contact information for contractor. b. Name of employee performing the work. c. Date of work performed, and hours spent. d. Description of the work performed including PMI s and equipment worked on. Detailed report noting any deficiencies found. e. Signature of employee that performed work as well as the COR. f. Bill of Materials (BOM) to include component name, quantity, part #, and assumption of price for any repair material required and material lead time. END OF STATEMENT OF WORK The contract period of performance: Base: 9/6/2026 09/05/2027 Option Year 1: 9/6/2027 09/05/2028 Option Year 2: 9/6/2028 09/05/2029 Option Year 3: 9/6/2029 09/05/2030 Option Year 4: 9/6/2030 09/05/2031 Place of Performance/Place of Delivery Address: Togus VA Medical Center 1 VA Center Augusta, ME Postal Code: 04330 Country: UNITED STATES The following solicitation provisions apply to this acquisition: 52.203-18 Prohibition on Contracting with Entities (JAN 2018). FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://sam.gov/ in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services. If paragraph (j) of the provision is applicable, a written submission is required. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services ADDENDUM to 52.212-2 EVALUATION COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (a) Basis for Award. The Government will issue a purchase order to the responsible quoter whose quotation conforming to the solicitation will be most advantageous to the Government, price and other factors considered. (b) The following factors shall be used to evaluate quotations: (1) Technical (2) Past Performance (3) Price (c) Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in FAR 13.106-2 (b) (3), where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation, but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following: (1) Technical: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. (2) Past Performance: The past performance evaluation will assess the relative risks associated with a quoter s likelihood of success in fulfilling the solicitation s requirements as indicated by the quoter s record of past performance. The past performance evaluation may be based on the contracting officer s knowledge of and previous experience with the supply or service being acquired; Customer surveys, and past performance questionnaire replies; Contractor Performance Assessment Reporting System (CPARS) at http://www.cpars.gov/; or any other reasonable basis. (3) Price: The Government will evaluate the price by adding the total of all line item prices, including all options The Total Evaluated Price will be that sum. (d) Options. The Government will evaluate quotations for award purposes by adding the total price for all options to the total price for the basic requirement. This includes options under FAR 52.217-8, Option to Extend Services, which applies to this solicitation. Evaluation of options under FAR 52.217-8 will be accomplished by adding six months of the quoter's price for the last potential period of performance under this contract to the quoter's total price. For example, if the contract includes option periods that are exercisable under FAR 52.217-9, the quoter's total price for the purpose of evaluation will include the base period, all option periods, and an additional six months of the last option period. Quoters must price only the base and option periods specified in the contract line-item numbers (CLINs) and shall not submit a price for the potential six-month extension of services under FAR 52.217-8. The Government reserves the right to exercise the option under FAR 52.217-8 before the end of any of the contractor's performance periods and will be exercised at the price and/or rates in effect at the time the clause is exercised. Evaluation of options shall not obligate the Government to exercise the option(s). (End of Provision) 52.229-11 Tax on Certain Foreign Procurements Notice and Representation (JUN 2020). 52.233-2 Service of Protest (DEVIATION NOV 2025) (a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from ______________________. [Contracting Officer designate the official or location where a protest may be served on the Contracting Officer.] (b) The copy of any protest shall be received in the office designated above within oneday of filing a protest with the GAO. (End of provision) 52.252-5 Authorized Deviations in Provisions (Nov 2020) 52.252-6 Authorized Deviations in Clauses (Nov 2020) As prescribed in 852.102(a), insert the following provision: Solicitation Provisions or Clauses Incorporated by Reference (JAN 2008) The following provisions or clauses incorporated by reference in this solicitation must be completed by the offeror or prospective contractor and submitted with the quotation or offer. Copies of these provisions or clauses are available on the Internet at the Web sites provided in the provision at FAR 52.252-1, Solicitation Provisions Incorporated by Reference, or the clause at FAR 52.252-2, Clauses Incorporated by Reference. Copies may also be obtained from the contracting officer. [Contracting officer shall list all FAR and 48 CFR Chapter 8 (VAAR) provisions and clauses incorporated by reference that must be completed by the offeror or prospective contractor and submitted with the quotation or offer.] (End of provision) 852.219-75 VA Notice of Limitations on Subcontracting Certificate of Compliance for Services and Construction. VA Notice of Limitations on Subcontracting Certificate of Compliance for Services and Construction (NOV 2022) (a) Pursuant to 38 U.S.C. 8127(k)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Contracting Officer check the appropriate box below based on the predominant NAICS code assigned to the instant acquisition as set forth in FAR 19.102.] (i) Services. In the case of a contract for services (except construction), the contractor will not pay more than 50% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs as set forth in 852.219-73 or VOSBs as set forth in 852.219-74. Any work that a similarly situated VIP-listed subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Other direct costs may be excluded to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service as set forth in 13 CFR 125.6. (ii) General construction. In the case of a contract for general construction, the contractor will not pay more than 85% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs as set forth in 852.219-73or VOSBs as set forth in 852.219-74. Any work that a similarly situated VIP-listed subcontractor further subcontracts will count towards the 85% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (iii) Special trade construction contractors. In the case of a contract for special trade contractors, the contractor will not pay more than 75% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs as set forth in 852.219-73 or VOSBs as set forth in 852.219-74. Any work that a similarly situated subcontractor further subcontracts will count towards the 75% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (2) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (3) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee; (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating section 1001 of title 18. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c) The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance with the limitations on subcontracting requirement. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror's bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee: Printed Title of Signee: Signature: Date: Company Name and Address: (End of clause) Parent topic: Subpart 852.2 - Text of Provisions and Clauses 852.233-70 Protest Content/Alternative Dispute Resolution (SEP 2018). 852.233-71 Alternate Protest Procedure (SEP 2018). 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998). As prescribed in 52.107(a), insert the following provision: This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far. https://www.acquisition.gov/far-overhaul 52.252-2 Clauses Incorporated by Reference (FEB 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far. The following contract clauses apply to this acquisition: 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2024) 52.204-7 System for Award Management Registration (DEVIATION NOV 2025). 52.204-9 Personal Identity Verification of Contractor Personnel (Jan 2011) 52.204-13 System for Award Management Maintenance. (DEVIATION NOV 2025) 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (DEVIATION NOV 2025). 52.217-8 Option to Extend Services (NOV 1999). 52.217-9 Option to Extend the Term of the Contract (MAR 2000). 52.222-90 Prohibition of Racially Discriminatory DEI Activities (APR 2026) 52.223-23 Sustainable Products and Services (May 2024) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3 Protest after Award (DEVIATION NOV 2025). 52.233-4 Applicable Law for Breach of Contract Claim (DEVIATION NOV 2025). 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION) (a) Definitions. As used in this clause American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://www.sam.gov (section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.). Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited. Covered article, as defined in 41 U.S.C. 4713(k), means: (1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types; (2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153); (3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or (4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.   Covered foreign country means The People s Republic of China. Covered telecommunications equipment or services means (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.   Critical technology means (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).   FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act covered foreign entity. FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e): (1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order. (2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order. (3) The Director of National Intelligence (DNI) may issue FASCSA orders that apply to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.   Information technology, as defined in 40 U.S.C. 11101(6) (1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use (i) Of that equipment; or (ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product; (2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but (3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.   Intelligence community, as defined by 50 U.S.C. 3003(4), means the following (1) The Office of the Director of National Intelligence; (2) The Central Intelligence Agency; (3) The National Security Agency; (4) The Defense Intelligence Agency; (5) The National Geospatial-Intelligence Agency; (6) The National Reconnaissance Office; (7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs; (8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy; (9) The Bureau of Intelligence and Research of the Department of State; (10) The Office of Intelligence and Analysis of the Department of the Treasury; (11) The Office of Intelligence and Analysis of the Department of Homeland Security; or (12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.   Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another s network to hand off traffic where it is ultimately delivered (e.g., connecting a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources. Kaspersky Lab-covered article means any hardware, software, or service that (1) Is developed or provided by a Kaspersky Lab-covered entity; (2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab-covered entity; or (3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab-covered entity.   Kaspersky Lab-covered entity means (1) Kaspersky Lab; (2) Any successor entity to Kaspersky Lab, including any change in name, e.g., Kaspersky ; (3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or (4) Any entity of which Kaspersky Lab has a majority ownership.   National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency (1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or (2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.   Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high. Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence. Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information. Source means a non-Federal supplier, or potential supplier, of products or services, at any tier. Subsidiary means an entity in which more than 50 percent of the entity is owned directly by a parent corporation or through another subsidiary of a parent corporation. Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service. Unmanned aircraft means an aircraft that is operated without the possibility of direct human intervention from within or on the aircraft (49 U.S.C. 44801(11)). Unmanned aircraft system means an unmanned aircraft and associated elements (including communication links and the components that control the unmanned aircraft) that are required for the operator to operate safely and efficiently in the national airspace system (49 U.S.C. 44801(12)). (b) Prohibitions on providing or using specific products or services in performance of contract. Unless a waiver or exception applies, the Contractor is prohibited from providing any products or services to the Government or using in the performance of the contract any of the following: (1) A covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor s employees (section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328)); (2) A Kaspersky Lab-covered article (Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91)); (3) Covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system (paragraphs (a)(1)(A) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)). This does not prohibit contractors from providing (i) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Prohibition on unmanned aircraft systems manufactured or assembled by American Security Drone Act covered foreign entities. (1) Prohibition. The Contractor is prohibited from (i) Delivering any FASC-prohibited unmanned aircraft system, which includes unmanned aircraft (i.e., drones) and associated elements (sections 1823 and 1826 of American Security Drone Act of 2023, within the National Defense Authorization Act for Fiscal Year 2024, Pub. L. 118-31, Div. A, Title XVIII, Subtitle B, 41 U.S.C. 3901 note prec.); (ii) On or after December 22, 2025, operating a FASC-prohibited unmanned aircraft system in the performance of the contract (section 1824 of Pub. L. 118-31); and (iii) On or after December 22, 2025, using Federal funds to procure or operate a FASC-prohibited unmanned aircraft system (section 1825 of Pub. L. 118-31). (2) Procedures. The Contractor shall search SAM for the FASC-maintained list of American Security Drone Act covered foreign entities before proposing, or using in performance of the contract, any unmanned aircraft system. Also, the Contractor shall ensure any effort or expenditure associated with a FASC-prohibited unmanned aircraft system is consistent with a corresponding exemption, exception, or waiver determination expressly stated in the contract. (3) Exemptions, exceptions, and waivers. The prohibitions in paragraph (c) of this clause do not apply where the agency has determined an exemption, exception, or waiver applies, and the contract indicates that such a determination has been made. See sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers. (d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract. (1) Certain telecommunications and video surveillance equipment, systems, or services. (i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system (paragraph (a)(1)(B) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)). (ii) This prohibition applies to using covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. This does not prohibit the contractor from using (A) A service that connects to the facilities of a third party, such as backhaul, roaming, or interconnection arrangements; or (B) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (2) Office of Foreign Assets Control Restrictions. (i) Except as authorized by the Office of Foreign Assets Control (OFAC) in the Department of the Treasury, the Contractor shall not acquire, for use in the performance of this contract, any supplies or services if any proclamation, Executive order, or statute administered by OFAC, or if OFAC s implementing regulations at 31 CFR chapter V, would prohibit such a transaction by a person subject to the jurisdiction of the United States. (ii) Except as authorized by OFAC, most transactions involving Cuba, Iran, and Sudan are prohibited, as are most imports from Burma or North Korea, into the United States or its outlying areas. (A) For lists of entities and individuals subject to economic sanctions, see OFAC s List of Specially Designated Nationals and Blocked Persons at https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists. (B) For more information about these restrictions, as well as updates, see OFAC s regulations at 31 CFR chapter V and at https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information. (C) To conduct electronic screens of potential parties to regulated transactions, see the consolidated screening list at https://www.trade.gov/consolidated-screening-list, which consolidates multiple export screening lists of the Departments of Commerce, State, and the Treasury. (3) Sudan prohibition. The Contractor is prohibited from conducting any restricted business operations in Sudan in accordance with Accountability and Divestment Act of 2007 (Pub. L. 110-174). (4) Iran prohibitions. (i) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, the contractor shall not engage in certain activities or transactions relating to Iran (section 6(b)(1)(A) of Iran Sanctions Act (50 U.S.C. 1701 note). (ii) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, contractor shall not export certain sensitive technology to Iran, as determined by the President, and has an active exclusion in SAM (22 U.S.C. 8515). (iii) The prohibition in paragraphs (d)(4)(i) and (d)(4)(ii) do not apply if the acquisition is subject to trade agreements and the offeror certifies that all the offered products are designated country end products or designated country construction material (see part 25). (iv) Unless an exception applies or the Government grants a waiver, contractors are prohibited from knowingly engaging in any significant transaction (i.e., over $15,000) with Iran s Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked according to the International Emergency Economic Powers Act (section 6(b)(1)(B) of Iran Sanctions Act (50 U.S.C. 1701 note)). (e) Governmentwide exclusion and removal orders. (1) Unless the Government has issued an applicable waiver, contractors shall not provide or use as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order as follows: (i) For solicitations and contracts awarded by a Department of Defense contracting office, DoD FASCSA orders apply. (ii) For all other solicitations and contracts, DHS FASCSA orders apply. (2) The Contractor shall search for the phrase FASCSA order in the System for Award Management (SAM) at https://www.sam.gov to locate applicable FASCSA orders. (3) The Government may identify in the solicitation other FASCSA orders that are not in SAM, which are effective and apply to the solicitation and resulting contract. (4) A FASCSA order issued after the date of solicitation applies to this contract only if added by an amendment to the solicitation or modification to the contract (see FAR 40.204-1(c)). (f) Reasonable inquiry. The contractor shall conduct a reasonable inquiry to determine if there are any prohibited products or services. The inquiry will look at any information in the entity s possession but does not need to include an internal or third-party audit. (g) Removal of prohibited products and services. For Federal Supply Schedules, Governmentwide acquisition contracts, multi-agency contracts or any other procurement instrument intended for use by multiple agencies, upon notification from the Contracting Officer, during the performance of the contract, the Contractor shall promptly make any necessary changes or modifications to remove any product or service produced or provided by a source that this clause prohibits. (h) General report. (1) If the Contractor identifies or is notified by any source, (including a subcontractor at any tier), that any product or service provided or used (or to be provided or used) during contract performance does not comply with any prohibition in this clause, then the Contractor shall report the following information, or as much information is known, in writing to the contracting office as identified in paragraph (h)(2) within 72 hours: (i) Contract number and order number, if applicable; (ii) The specific prohibition the product or service is not complying with; (iii) A description of the products or services that the Contractor identifies or has reason to suspect is prohibited (include brand; model number, such as the original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable); (iv) The entity that produced the product or service (include entity name, unique entity identifier, Contractor and Government Entity (CAGE) code, facilities responsible for design, fabrication, assembly, packaging, and test of the product, and whether the entity was the OEM or a distributor (provide manufacturer codes and distributor codes used for the product)); (v) Description of the functionality of the product or service and how that functionality impacts the risk to the product or service; (vi) An explanation of any factors relevant to determining if the product or service should be permitted by an applicable exception, exemption, or waiver (if the contractor would like the Government to consider a waiver, and asks for such a waiver); (vii) Whether alternative products or services are available that would comply with the prohibition; (viii) If the product or service is related to item maintenance, include the following information on the item being maintained: (A) Brand; (B) Model number, OEM number, manufacturer part number, or wholesaler number; and (C) Item description, as applicable. (ix) Any readily available information about mitigation actions implemented or recommended. (2) If a report must be submitted to a contracting office, the Contractor shall submit the report as follows: (i) If a Department of Defense contracting office, the Contractor shall report to the website at https://dibnet.dod.mil. (ii) For all other contracting offices, the Contractor shall report to the Contracting Officer. (iii) For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order. (3) If the report provided does not contain any of the information required by paragraph (h)(1) of this clause, and the contractor later discovers new information that is required by paragraph (h)(1) of this clause, then the contractor shall submit a subsequent report within 72 hours of discovering the new information. (4) The contractor shall also report the information in paragraph (h)(1) if the contractor wishes to ask for a waiver of the requirements of a new FASCSA order being applied through modification. (i) New FASCSA orders report. (1) During contract performance, the Contractor shall review SAM at least once every three months, or as advised by the Contracting Officer, to check for covered articles subject to FASCSA order(s), or for products or services produced by a source subject to FASCSA order(s) not currently identified under paragraph (e) of this clause. (2) If the Contractor identifies a new FASCSA order(s) that could impact their supply chain, then the Contractor shall conduct a reasonable inquiry to identify whether a covered article or product or service produced or provided by a source subject to the FASCSA order(s) was provided to the Government or used during contract performance. The inquiry will look at any information in the entity s possession but does not need to include an internal or third-party audit. (3) The Contractor shall submit a report to the contracting office identified in paragraph (h)(2) of this clause if the Contractor identifies, including through any notification by a subcontractor at any tier, that a covered article or product or service produced or provided by a source was provided to the Government or used during contract performance and is subject to a FASCSA order(s). For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order. The Contractor shall report the following information within 72 hours for each covered article or each product or service produced or provided by a source, where the covered article or source is subject to a FASCSA order: (i) Contract number and order number, if applicable; (ii) Name of the covered article or source subject to a FASCSA order; (iii) The specific FASCSA order the product or service does not comply with; (iv) The elements of (h)(1)(iii) through (ix) of this clause. (j) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (j) but excluding subparagraphs (d)(1) and (i)(1), in all subcontracts and other contractual instruments, including subcontracts for acquiring commercial products or commercial services. (End of clause) 52.244-6 Subcontracts for Commercial Products and Commercial Services. (DEVIATION NOV 2025). 852.201-70 Contracting Officer s Representative (DEC 2022). 852.203-70 Commercial Advertising (MAY 2018) 852.204-70 Personal Identity Verification of Contractor Personnel (MAR 2026) (DEVIATION FEB 2026). 852.204-72, Personnel Vetting and Credentialing. (MARCH 2026) 852.219-73 VA Notice to Total Set-Aside for Certified Service-Disabled Veteran-Owned Small Businesses (JAN 2023) (DEVIATION). 852.222-71 Compliance with Executive Order 13899. (DEVIATION) (APR 2025) 852.223-71 Safety and Health (SEP 2019). 852.232-72 Electronic Submission of Payment Requests (NOV 2018). 852.242-71 Administrative Contracting Officer (OCT 2020) 852.246-71 Rejected Goods (OCT 2018) 52.212-4 Contract Terms and Conditions Commercial Products and Commercial Services (DEVIATION OCT 2025). The following subparagraphs are applicable: 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024). 52.203-6 ALT I. Restrictions on Subcontractor Sales to the Government (NOV 2021). 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded (JAN 2025). 52.219-8 Utilization of Small Business Concerns (JAN 2025). 52.219-14 Limitations on Subcontracting (OCT 2022). 52.222-3 Convict Labor (June 2003). 52.222-21 Prohibition of Segregated Facilities (APR 2015). 52.222-26 Equal Opportunity (SEPT 2016). 52.222-35 Equal Opportunity for Veterans (JUN 2020). 52.222-36 Equal Opportunity for Workers with Disabilities (Jun 2020). 52.222-37 Employment Reports on Veterans (Jun 2020). 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (DEC 2010). 52.222-41 Service Contract Labor Standards (AUG 2018). 52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014). 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (AUG 2018). 52.222-50 Combating Trafficking in Persons (Oct 2025). 52.222-54 Employment Eligibility Verification (Jan 2025). 52.222-55 Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022). 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2022). 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024). 52.232-33 Payment by Electronic Funds Transfer-System for Award Management (Oct 2018). 52.242-5 Payments to Small Business Subcontractors (Jan 2017). 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023). 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017). SAM: Interested parties shall be registered in System for Award Management (SAM) as prescribed in FAR Clause 52.232-33. SAM information can be obtained by accessing the internet at www.sam.gov or by calling 1-866-606-8220. Interested parties not registered in SAM in sufficient time to meet the VA s requirement will be ineligible to receive a government contract. This determination will be at the discretion of the Contracting Officer. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations, including 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals Representation, and paragraph (t) of 52.212-3, Offeror Representations and Certifications Commercial Products and Commercial Services. The VA utilizes VISTA to issue a purchase order and liquidate invoices. Failure to register in VISTA may result in exclusion from the issuance of a VA contract. This determination will be at the discretion of the Contracting Officer. Interested parties with no prior VA contracts can apply here: https://www.cep.fsc.va.gov/ All quoters shall submit the following: Attachment 2 - Price Schedule Attachment 3 - Past Performance Worksheet All quotes shall be sent to the Contract Specialist, Yolanda Rankin Award will be based upon a comparative evaluation of quotes. Comparative evaluation is the side by side pairwise comparison of quotes based on factors resulting in a Contracting Officer decision for the quote most favorable to the Government. The award will be made to the response most advantageous to the Government. Responses should contain your best terms, conditions. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoters shall list exception(s) and rationale for the exception(s), if any. Questions shall be submitted to the Contracting Officer in writing via e-mail at yolanda.rankin@va.gov. Oral questions are not acceptable due to the possibility of misunderstanding or misinterpretation. The cut-off date and time for receipt of questions is 29-Jun- 2026 by 12:00 PM EST. Questions received after this date and time may not be answered. Questions shall be answered in a formal amendment to the solicitation so all interested parties can see the answers. A site visit is planned for 23-June-2026 at 10:00AM. We will meet at the main entrance of the 1 VA Center, Outside Building 202, Augusta, ME  04330. Submission of your response shall be received not later than 13-Jul-2026 by 12pm. RFQ responses must be submitted via email to: Yolanda.Rankin@va.gov. Hand deliveries shall not be accepted. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(c). Point of Contact Yolanda Rankin Yolanda.Rankin@va.gov ATTACHMENT 1 VA MAIN GENERATORS ATTACHMENT 2 PRICE SCHEDULE Base Year: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services 12 MT $________________ $_________________ GRAND TOTAL $_________________ Option Year 1: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services 12 MT $________________ $_________________ GRAND TOTAL $_________________ Option Year 2: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0003 Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services 12 MT $________________ $_________________ GRAND TOTAL $_________________ Option Year 3: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0004 Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services 12 MT $________________ $_________________ GRAND TOTAL $_________________ Option Year 4: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0005 Preventive Maintenance Contract for Emergency Generators, to include Inspection, Preventive Maintenance, and Repair Services 12 MT $________________ $_________________ GRAND TOTAL $_________________ ATTACHMENT 3 PAST PERFORMANCE WORKSHEET 1. Name of Contracting Activity, Government Agency, Commercial Firm or other Organization: 2. Contracting Activity Address: 3. Contract Number: 4. Date of Contract Award: 5. Beginning Date of Contract: 6. Completion Date of Contract: 7. Contract Value: 8. Type of Contract: 9a. Technical Point of Contact: 9b. Contracting Point of Contact: Name: Name: Title: Title: Address: Address: Telephone: Telephone: Email: Email: 10. Place of Performance: 11. Description of Work (Use a continuation sheet if necessary): 12. List any commendations or awards received: 13. List of Major Subcontractors: PAST PERFORMANCE WORKSHEET 1. Name of Contracting Activity, Government Agency, Commercial Firm or other Organization: 2. Contracting Activity Address: 3. Contract Number: 4. Date of Contract Award: 5. Beginning Date of Contract: 6. Completion Date of Contract: 7. Contract Value: 8. Type of Contract: 9a. Technical Point of Contact: 9b. Contracting Point of Contact: Name: Name: Title: Title: Address: Address: Telephone: Telephone: Email: Email: 10. Place of Performance: 11. Description of Work (Use a continuation sheet if necessary): 12. List any commendations or awards received: 13. List of Major Subcontractors: PAST PERFORMANCE WORKSHEET 1. Name of Contracting Activity, Government Agency, Commercial Firm or other Organization: 2. Contracting Activity Address: 3. Contract Number: 4. Date of Contract Award: 5. Beginning Date of Contract: 6. Completion Date of Contract: 7. Contract Value: 8. Type of Contract: 9a. Technical Point of Contact: 9b. Contracting Point of Contact: Name: Name: Title: Title: Address: Address: Telephone: Telephone: Email: Email: 10. Place of Performance: 11. Description of Work (Use a continuation sheet if necessary): 12. List any commendations or awards received: 13. List of Major Subcontractors: