Microcrystalline Wax #118P

Description

Minimum Specifications for Microcrystalline Wax #118P. (1) Wax Specifications: (a.) Melting point F/C, D 127 192 MIN 194-90 Penetration @77F/100F, D1321, 10 MAX 7,Color, ASTM D1500, 0.5 MAX, 1.05, Oil Content, WT%, D 721, 1.8 MAX, 0.5, Flash, PMF/C, D93, 500 MIN, 515/268 Viscosity, SUS, 210 F/98/9C, D2161, 90MIN, 99, Gravity,AP1, D 287, 34 MIN 36 MAX, 35, Odor, D 1833, 2 MAX, 1 Pound/Gallon AVG, D1250,7.076, Specific Gravity, 0.849. (b.) Wax must be in bead or flake form only. (2) Provide the manufacturer information of the wax. (3) Wax Packaging Requirements are as follows: (a.) 15 inches in length X 12 inches in width X 12 inches in height. (b.) Each box is not to exceed 50 lbs. (d.) No more than 40 boxed per pallet (2000 lbs.) (e.) Every box must be sealed. Within the box the wax is to be encased in a sealed anddurable plastic bag. SEE ATTACHED FOR COMPLETE SPEC REQUIREMENTS.

Classification

NAICS

325998

All Other Miscellaneous Chemical Product and Preparation Manufacturing

31-33├Manufacturing

325├Chemical Manufacturing

3259├Other Chemical Product and Preparation Manufacturing

32599├All Other Chemical Product and Preparation Manufacturing

325998└All Other Miscellaneous Chemical Product and Preparation Manufacturing

PSC

9160

MISCELLANEOUS WAXES, OILS, AND FATS

91├FUELS, LUBRICANTS, OILS, WAXES

9160└Miscellaneous Waxes, Oils, and Fats

Set-aside

SBA

Total Small Business Set-Aside (FAR 19.5)

Description

Points of contact

Contracting office

Classification

Documents