This is a Presolicitation Notice only. This is not a Solicitation (Request for Quote). No purchase order will be awarded from this announcement. Any applicable attachments for this project (i.e., Drawings and Specifications) will be issued at the time of the Solicitation. This procurement is a 100% Total Small Business Set-Aside. All interested and capable small business offerors are encouraged to submit a quote. Project Description The Millvale LPP was constructed by U.S. Army Corps of Engineers (USACE) in 1980 under the authority of Section 205 of the Flood Control Act of 1948 as amended. The project consists of about 6,200 feet of channel improvement including concrete gravity retaining walls, concrete wall supports, anchored concrete toe blocks, concrete cap walls, stone-filled gabion mattresses, flap gates and access ramps. The LPP is an urban Flood Control Work (FCW), and it is not a multipurpose project. Heavy rains from 1-12 April 2024 caused flooding which damaged the Project within Girty’s Run, including bank erosion, shoaling, erosion of the improved channel, ruptured gabion baskets, washed-out concrete buttresses, and erosion of grouted riprap. Of particular concern are the washed-out buttresses which have migrated to the center of the improved channel, impeding streamflow. If the buttresses are not removed and stream bank improvements continue to deteriorate, there is a risk that debris will continue to accumulate and could ultimately damage the channel downstream of the impediment. To address these damages, Allegheny County requested rehabilitation assistance from USACE through the PL 84-99 program, which authorizes USACE to rehabilitate eligible Federal and non-Federal LPPs damaged or destroyed by floods. An agreement was signed on 6 August 2025 between the Borough of Millvale and USACE to complete the necessary repairs. Some of the major features of work are, but not limited to: Temporary Stream Diversion, Dewatering, and Environmental Controls Stream Flow Control: Design, furnish, operate, maintain, and remove a temporary stream diversion and bypass pumping system to perform all channel bottom and bank work in a dry, dewatered state. Effluent Filtration: Discharge from pumping systems must pass through approved sediment and debris control filtration before re-entering Girty's Run. E&S Controls: Install, inspect, and maintain erosion and sediment controls compliant with PADEP Publication 363-2134-008. The project is located along Girty’s Run and Boomer Run between Station 68+00 and Station 73+80, Allegheny County, Pennsylvania. The work is to be completed within 365 calendar days after written Notice to Proceed (NTP). The Anticipated Construction Cost is between $300,000.00 and $350,000.00. The contractor is responsible for all project submittals, including a Quality Control Plan, Accident Prevention Plan, and various shop drawings and product data for government approval. Special Notice: Safety and Qualification Requirements Safety Compliance (EM 385-1-1): Offerors are advised that all work on this project must strictly comply with the latest edition of the U.S. Army Corps of Engineers (USACE) Safety and Health Requirements Manual (EM 385-1-1) (Link: https://www.publications.usace.army.mil/Portals/76/EM%20385-1-1%20_EFFECTIVE%2015March2024.pdf). Prior to commencing work, the contractor must submit and secure Government approval for a site-specific Accident Prevention Plan (APP) and comprehensive Activity Hazard Analyses (AHAs). To enforce these standards, the contractor must employ a full-time, dedicated Level 1 Site Safety and Health Officer (SSHO) who must be present on-site at all times when work is in progress. The SSHO may also serve as the Quality Control System Manager (QCSM) but is strictly prohibited from serving as the project Superintendent. See Personnel and Contractor Qualifications . Personnel and Contractor Qualifications: To ensure technical competency and safe execution of this project, the Government requires key personnel to meet strict experience thresholds. The contractor must assign a Project Superintendent with a minimum of five (5) years of construction experience, with at least five (5) of those years acting as a superintendent on earthwork and channel restoration projects similar in size and complexity. Additionally, the contractor must provide a Quality Control System Manager (QCSM) who has a minimum of five (5) years of construction experience on similar projects and holds a valid "Construction Quality Management for Contractors" (CQM-C) certification, as well as a dedicated Site Safety and Health Officer (SSHO). General Information The North American Industrial Classification Code (NAICS) is 237990 – Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. Any resultant award will be for one (1) Firm-Fixed-Price (FFP) Purchase Order. The solicitation will be issued on or about 4 November 2026, via the Procurement Integrated Enterprise Environment (PIEE), which posts the opportunity to SAM.gov. The anticipated award date is 30 November 2026. The basis of award will be of best value to the Government. Basis of Award is best value to the Government. Quotes will be evaluated in accordance with (IAW) RFO 12.203(a) and RFO 13.202, price and past performance. The Government reserves the right to reject any quotes that are unrealistically low or exceed available funds for this requirement. Small Business Contractors are advised that APEX Accelerators provide free, expert assistance to small businesses interested in competing for federal, state, and local government contracts. Small businesses are strongly encouraged to connect with their local APEX Accelerators to leverage these valuable services. The APEX Accelerators Website is: https://www.apexaccelerators.us/#/. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Strategic-Partnerships/Partnering/mod/129895/details/443/ then scrolling down on right hand side of page by clicking on “View FFP Contract Changes Playbook Here”. To submit a quote for this project, your company must: 1) Be registered in the System for Award Management (SAM) and maintain an active registration status. 2) be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Role. System for Award Management (SAM) Registration Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: a) Navigate to SAM.gov b) Select Sign-In (top right) c) Select Create an Account then follow the instructions d) After Account is set-up, Select Sign-In e) Under the Entity Management widget, select “Get Started” button f) Select Register Entity. As part of the entity registration, a Unique Entity ID will be assigned. For additional information on SAM To Register your Entity (Company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index. Here you will find the following: Get Started with your Registration Check Registration Status – ACTIVE, INACTIVE, PENDING Update your Registration Become an Entity Administrator Validate your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions. PLEASE NOTE: It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration. Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration. To register for PIEE follow the below instructions. Register in PIEE: a) Navigate to https://piee.eb.mil/ b) Select New User (top right) c) Select Register d) Select Vendor e) Create a User ID and Password and follow the prompts (next) f) Create Security Questions (next) g) Complete your User Profile Information (next) h) Complete your supervisor or Approving Official Information (next) i) Complete Roles i) Step 1: Select SOL-Solicitation ii) Step 2: Select Proposal Manager iii) Step 3: Click Add Roles iv) Step 4: Fill in your Location Code (CAGE Code) (next) i) Provide Justification for your registration (next) j) Follow the remaining prompts to submit your registration The Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling Telephone Number 866-618-5988 for assistance.
