Paving March ARB

SOURCES SOUGHT: THIS IS NOT A NOTICE OR REQUEST FOR PROPOSAL BUT FOR

INFORMATIONAL AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost in developing information provided to the Government. If a solicitation is issued, it will be announced at a later date and all interested parties must respond to that solicitation announcement separately from responses to this announcement.

This notification is being conducted by the 163rd ATKW at March ARB.

This Sources Sought is only intended to identify potential sources for the purpose of market research, describes only the current contemplated scope of potential requirements and may vary from the scope of the requirement in a final SOW included in any RFP.

The Sources Sought number is 26-P-0000 036653 and shall be used to reference any written responses to this Sources Sought.

The anticipated North American Industry Classification Systems (NAICS) code is 237310, Highway, Street, and Bridge Construction with a size standard for the proposed NAICS of $45M.

Business Status: The Government is interested in all Small Businesses that are capable of meeting this requirement, including, HUBZone, SDVOSB, WOSB, VOSB, and general Small Businesses.

Work includes design, inspection, preparation, slurry seal types II and III, mill and overlay, curbs, full depth replacement, striping and signage.

PAVING TYPES

Multiple paving types are required for this project and will be indicated in drawings upon release of solicitation.

SLURRY

Slurry Seal Types II & III are required to include preparation, crack filling and slurry seal.

OVERLAY

Milling and Overlay will be required for this project and will be indicated in drawings upon release of solicitation.

REPLACEMENT

Providing Full Depth Replacement will be required for this project as well and will be indicated in drawings upon release of solicitation.

There will be a requirement to Survey the sites and provide Grading and Striping Plans in Civil 3D to include:

- Increase parking lot depth to south ~5’ to 120’

- Provide 4 parking rows, 9’x18’ stalls with 24’ aisles.

- Include north & south flush curb in overall dimension.

- Raise paving flush at concrete pad with consistent 2% slope approximate

entire lot.

- Flush PCC Curb: 12”W x 8”D with (2) #4 rebar continuous 3” from edges.

- At flush curb grade planter -6”FS x 5’W out then slope to meet existing glade.

- Submit plans to government for review.

- Demo: 4” full depth asphalt paving, base and headers, planters and trees as

shown, roots and stumps grinded to subgrade, ~10’ LF lifted curb and gutter,

and (26) concrete wheel stops.

Grading: Compact subgrade to 95%

Base: Provide 6” Class 2 AB placed in lifts and compacted to 95% relative

compaction per Caltrans Section 26. Grade for drainage and proof roll prior to paving.

Paving: Place and compact minimum depth 4” HMA 1/2 mix, PG64-10 binder per

Caltrans Section 39. Place in lifts and compact to spec. provide tack coat, and finish

to smooth grade with positive drainage.

Curbs: Provide ~530 LF flush PCC curb at planter edge per Caltrans Section 73.

Over excavate -18”D FS, cut roots as required, compact and provide base.

Base: Add and repair for 6” 3/4” Class 2 AB compacted to 95% per Caltrans Section

26.

Paving: Place 4” HMA, 1/2 mix, PG64-10 binder per Caltrans Section 39.

PAVEMENT MARKING AND SIGNAGE

Pavement Marking and Signage will be required for this project.

1 Provide double line striping 4” wide and other pavement markings per Caltrans Section 84.:

a. Locate at existing

b. Provide per Replacement Paving – Striping Plan.

2. Provide new Van Accessible parking stalls with striping, markings and signage per ADA.

a. Submit standard details.

b. All Locations will be shown on drawings upon solicitation release.

CAPABILITY STATEMENT: Firms responding to this Sources Sought notice are requested to provide a capability statement. At a minimum, the capability statement must include:

• Company Name
• Point of Contact Name
• Unique Entity Number (UEI) and CAGE Code
• Small Business socio-economic status under NAICS 237310
• Brief descriptions of recent and relevant projects for tasks similar to those in the description of work with the associated agency’s name, contract number (if applicable), and agency point of contact
• If work was conducted under a teaming agreement, please annotate if work was performed as the prime or the subcontractor

Capability statements must be submitted via e-mail to the POCs listed below no later than 1:00 PM Local Time on 10 June 26. Telephone responses will not be accepted.

Name: MSgt David Moreno

Email: david.moreno.34@us.af.mil

Name: Jeremy Hebb

Email: jeremy.hebb.2@us.af.mil

Future information about this acquisition, including issuance of a Request for Proposal or an Invitation for Bid, or applicable amendments, will be issued through SAM.gov. Interested parties are responsible for ensuring they have the most up-to-date information regarding this acquisition.

All firms should be registered in the System for Award Management (SAM) located at http://www.sam.gov.