J023--Van lift Gate Installation

Description

Scope of Work (SOW) Lift Gate Installation for Sprinter Van Project Overview: The contractor shall provide all labor, materials, supervision, transportation, and equipment necessary to supply and install one (1) new 1,100-lb capacity hydraulic lift gate onto the designated Sprinter van. The installation must be conducted in accordance with all manufacturer specifications, safety standards, and applicable federal, state, and local regulations. Technical Requirements: Provide and install one (1) new rear-mounted hydraulic lift gate assembly. Minimum load capacity: 1,100 pounds. Lift gate must be compatible with the existing Sprinter van make and model. Provide all required hardware, wiring, brackets, hydraulic components, and fasteners. All electrical work shall comply with vehicle manufacturer guidelines and safety standards. Lift gate shall include corrosion-resistant materials suitable for coastal climates. Upon completion, perform full operational testing, safety verification, and functional load testing.

Classifications

NAICS

811198

All Other Automotive Repair and Maintenance

81├Other Services (except Public Administration)

811├Repair and Maintenance

8111├Automotive Repair and Maintenance

81119├Other Automotive Repair and Maintenance

811198└All Other Automotive Repair and Maintenance

PSC

J023

MAINT/REPAIR/REBUILD OF EQUIPMENT- GROUND EFFECT VEHICLES, MOTOR VEHICLES, TRAILERS, AND CYCLES

J├MAINT, REPAIR, REBUILD EQUIPMENT

J0├MAINT, REPAIR, REBUILD OF EQUIPMENT

J023└Maintenance, Repair and Rebuilding of Equipment: Ground Effect Vehicles, Motor Vehicles, Trailers, and Cycles

Set-Aside

SDVOSBC

Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Documents

Primary Contact